If it turns off it might be the MAP censor it happened to my 2001 dodge if not take to a Dodge dealer they will tell exactly wats wrong and how to fix it :)
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
the timing on the distribuitor does not match the sparking timing on your car which your supposed to mark it when u took it off so when installed it will have the same timing if it isnt that test your distribuitor conecction it could be worn off too much to have all coils working.
the injectors don't work without spark, keeps from flooding the engine, you have to find out why no spark, so thats fuses, connections, a troubleshooting manual and a volt ohm meter, it could even be the ignition switch, so don't change anymore parts till you know why
well my first question is, if you changed the distribuitor, did you make sure that the timeing is correct? Its possible that the timing is 180 degrees off, which can cause the problem your experiencing. That would be my first suggestion. My second suggestion is fuel regulator, or a clog in the fuel line somewhere.
you might have a bad fuel pump, try to keep it runing with barke parts cleanerr or carburetor cleaner aplyed to intake and if stays runing then you need a fuel pump, or have some one check your fuel presure, feed back will be apreciated
does it turn off while running??
×