After changing oil how to reset oil life mointor
SOURCE: Oil Life Reset
Put the key in the ignition, and turn it on (don't crank the engine) while holding out on the small instrument cluster stalk near the clock. When the key is turned on, keep holding this stalk out, and push and release the other one (the one on the right). This should turn the "oil service" message to "----". Turn off the key and then release the left stalk. When you turn the car back on, the message should be gone.
SOURCE: reset oil life display after oil change?
THIS SHOULD BE IT.
How do I reset the Engine Oil life monitor and how does it work?
TO reset
To reset the Engine Oil Life monitor do the following:
Reset Oil life in NAV/DIC by (with car running) going to INFO>Oil Life>RESET
Press and HOLD until XXX turns to 100%
How does it work?
The oil life monitor is a pretty sophisticated algorithm.
GM "The GM Oil Life System will automatically adjust the oil change interval based on engine characteristics, driving habits and the climate in which the vehicle is operated."
SOURCE: i have a pontiac g5 and got the oil changed but
When you push the button tn your tripometer on the dash, it will show you the tripometer. push it again and it will show you the oil life expected value of your Engine Oil. Just push the button again for about 5 to 8 seconds and that will reset the Oil meter. Good luck
SOURCE: how to reset change oil soon light 2005 pontiac montana
just go to the number on the odometer and hold the trip reset untill the number goes back to 100
SOURCE: How do I reset Oil Life warning Message
Turn ignition on,need not running.Hold the reset button in until oil life xxx% blinking ,let go the button.Then hold it in again until it shows oil life 100%.Done
497 views
Usually answered in minutes!
×