Question about Cars & Trucks

1 Answer

Car wont idle

Will not idle changed all sencors and selinoids are clicking for fuel pump and stop engine

Posted by Paul Borelle on

Ad

1 Answer

raj somaiya

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Cars & Trucks Master
  • 5,370 Answers

There re few possibilities that can cause no idle issues.To troubleshoot the issue help links are provided below.Click the link below:---
Idle Problem? http://whatisbyme.blogspot.in/2012/05/2001toyota-corolla-idle-problem.html
---------
Idles rough and quits when gas pedal is pressed less? http://technoanswers.blogspot.in/2012/01/1999-ford-f-150-idles-rough-and-quits.html-----------
Stumbling and stalling at idle after engine rebuild? http://schematicsdiagram.blogspot.in/2012/03/stumbling-and-stalling-at-idle-after.html

--------
Cooling fan Shuts OFF and Idle Drops? http://howtobyme.blogspot.in/2012/05/toyota-celica-cooling-fan-shuts-off-and.html

---------
Rough Idle and Vibration? http://whatisbyme.blogspot.in/2012/05/2006-ford-f150-rough-idle-and-vibration.html

---------
Steering Wheel Vibrates at Idle? http://whatisbyme.blogspot.in/2012/05/1993-toyota-corolla-steering-wheel.html

---------
Runs Fine But Idle Is Low? http://whatisbyme.blogspot.in/2012/05/2004-toyota-highlander-runs-fine-but.html

--------
Vehicle Will not hold Idle? http://whatisbyme.blogspot.in/2012/05/2003-lexus-es300-vehicle-will-not-hold.html

----------
Engine Idles Rough and Dies? http://whatisbyme.blogspot.in/2012/05/1994-lexus-es300-engine-idles-rough-and.html

---------
This will help.
Thanks.

Posted on Jul 17, 2012

Ad

5 Related Answers

Anonymous

  • 6 Answers

SOURCE: 2000 toyota corolla ve engine will run at idle but

Install a new mass air flow meter i own this car ive had this issue with my own and several others

Posted on Jul 25, 2009

Ad

Anonymous

  • 125 Answers

SOURCE: olds alero 2.4 idle fuel pressure

most likely idle air control sensor or low engine coolant I know sounds funny but IAC uses coolant to regulate idle. Idle air control valve or throttle body positioning sensor.

Posted on Feb 26, 2009

Anonymous

  • 1 Answer

SOURCE: 1983 Ford F250 will start but won't idle without holding down gas

Its a ford! its cold blooded!! give it a minute, or adjust your choke, idle screw or timing. c'mon dude- even I know that. -BobbyGirl

Posted on Apr 05, 2009

Anonymous

  • 61 Answers

SOURCE: I changed EGR valves, selinoid, sensors, and even

go to auto zone or someone with a scan tool to find out what codes are stored on the computer in the car

Posted on Jul 30, 2009

Anonymous

  • 344 Answers

SOURCE: 93 volvo 850 glt changed the fuel pump now car

Check your fuel pressure to ensure proper pressure to the block, also did you replace the fuel filter.

On a side note: 3 things a automobile needs to run

AIR-make sure you have a clean air filter and your MAF (mass air flow sensor is plugged in) if you pulled your breather to innspect anything, there is a possibility that it came unplugged or you unpluged it and forgot to hook it back up, a car wont start without it being plugged in if equiped

SPARK-Make sure your car has juice to the plugs, if the plug doesnt fire the car wont run, if you have to pull each plug and ground them to the engine block to see if they arch. If not trace the problem down (if you changed the fuel pump you have some mechanical skill and should be able to troubleshoot a spark issue)

FUEL-Check for proper pressure, dirty fuel filter(s) and if your system has a return line, make sure your hoses didnt get crossed cause this will damage the engine and regulator.

Hope this helps Thanks for using Fixya.com

Posted on Jan 22, 2010

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

After running with bad o2 sencor for 2 days, starts stalling and idling bad why does my car run badly after new extractors and o2 sencor?


Find out why the light is on. Maybe you broke or dislodged a connector when you replaced the sensor.

Jun 02, 2017 | 1991 Toyota Cressida

1 Answer

I have a ruff idle and hesitate at times


Could be a long list of things.
Low fuel pressure, injector problems, ignition problems, even valves or a weak cam.
Someone will have to figure out if it is fuel, ignition, or engine related to proceed.

Dec 05, 2012 | 1995 Chevrolet Caprice Classic

1 Answer

My 91 pathfinder has a looping idle..dosent do it all the time...ive changed fuel fillter, TPS, and cleaned air intake sencor.....will run and drive fine and then go to start and it will starve out and...


fuel pump or pump regulator cud be failin--distributer cap may be corroded--do a scan for bad codes--clean throttle body and idle control motor--get a haynes manual

May 11, 2011 | 1991 Nissan Pathfinder

1 Answer

1987 ford mustang LX 2.3 just started giving me acceleration and stalling problems, ive cleand the throttle body, ive cleand the map sencor, i took out the thermostat completley, changed the fuel pump, the...


make sure the air filter is intact and clean, the engine needs to breathe
do you have fuel pressure?
how about spark, do you have a good spark ?
change plugs and wires

Nov 07, 2017 | 1987 Ford Mustang

1 Answer

I changed EGR valves, selinoid, sensors, and even


go to auto zone or someone with a scan tool to find out what codes are stored on the computer in the car

Jul 30, 2009 | 1997 Ford Expedition

3 Answers

1983 Ford F250 will start but won't idle without holding down gas


hi! there, its really help good of replacing old ones,perhaps the condition of current flow to ignite continously your combustion due insuffcient current supply from your ignition system could positively stop your engine,if you maintain this ignition system the engine won't stop running.in such a case this type of model need mostly to be tune up some internal part on the head cylinder should take place of correctnes such as intake and exhaust valve,the rocker arm seat valve and spurk plug.if you done this your worry will be lessen.have a nice day.

Apr 02, 2009 | 1983 Ford F 250

2 Answers

Stopped while running


I had the same problem. I found out that the fuel pump was not putting out enough pressure. changed the pump and bam down the road I went.

Dec 18, 2008 | 2002 Hyundai Accent

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

1,954 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

john h

Level 3 Expert

23438 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...