- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I am a mechanic ..most people ask questions about these foreign hyundai motors ..below is an example of engines that basically if you ask about a Hyundai Xg 350 ,xg300 ..well allow me to hammer 90% of your questions in case you want to grab another motor ..these motors listed will work on 90% of all hyundai products ...Look at the starter sizes ,,all the same for the selected models ..then look at the motor sizes ..This will help you in solving some problems most do not give the specific questioning 100% NEW REPLACEMENT STARTER FOR STARTER
You'll need to be more specific with the info on your car if you want to know the part # of the motor mount you need. Which engine is in your car, and is it auto or manual transmission?
Depending on engine size and transmission, your car has either 3 or 4 motor mounts. Once you figure out which size engine and type of transmission you have, call your local auto parts store like Advance, Oreilly's or Autozone. Tell the representative you need to know the part # of the motor mount you need to replace, and he'll ask you for your vehicle's info. Once you tell him this, he can give you the part #.
Did the timing belt break?
I dont think that it would... But with the water pump locked up. It could have jumped over a tooth when you was driving it. If the belt got hot and streched. maybee???? But I think it will break before it can jump over a tooth. Or if even one tooth will cause your engine to have to be replaced. It didnt overheat? Or die? did you turn it off and tow it?
Im assuming it is an engine that uses a timing belt. It sounds like the belt has jumped 1 tooth. if it only jumped 1 tooth than the computer will compesate the timing so it is possible the sensors will say they are ok. If it is a motor that uses a chain than it problaly needs a new gear/chain set.