Question about 2006 Cadillac SRX
U changed out the front right turn signal bulb and it worked good for 3 weeks the front right signal quit again the bulb filament looks good with nobreaks in the filaments. what is the problem
The socket is defective?? Probe the socket with a volt meter to see if voltage is turning on and off to trigger the bulb to flash.
Posted on Jul 09, 2012
wow i feel sorry for you because Cadillac designed this bulb to be a don't get to bulb but OK here's what you do take the bottom cover off or skid plastic panel under neath the front end theirs little plastic clips holding it on just get come dikes and don't cut them but just use it to help pull them out. after you get that off use a flash light and locate your light housing you should see two screws holding the house in i think those screws are 8mm i cant remember remove those two screws and be careful the metal from the bumper cuts you pull the light housing out and remove all the screws around the housing and open the housing up replace the bulb and make sure your contact to the bulbs clean and then reassemble the way you took apart. if you cant get it well then best bet is take it somewhere i know Cadillac charges an arm and a leg so you can go somewhere else.
Posted on Jan 25, 2009
Should be able to open the hood remove plastic headlight cover & pull pins (2) on light assembly whole light assembly will pull out then replace turn signal.
Posted on Dec 02, 2009
Tips for a great answer:
Mar 04, 2013 | 2004 Cadillac SRX
Mar 26, 2012 | 2006 Cadillac SRX
Feb 20, 2011 | Cadillac SRX Cars & Trucks
Sep 03, 2010 | Cadillac SRX Cars & Trucks
May 13, 2010 | 2006 Cadillac SRX
May 10, 2010 | 2004 Cadillac SRX
Dec 02, 2009 | 2006 Cadillac SRX
Feb 23, 2009 | 2004 Cadillac SRX
Nov 13, 2008 | 2004 Cadillac SRX
Nov 12, 2008 | 2006 Cadillac SRX
449 people viewed this question
Usually answered in minutes!