1998 Hyundai Elantra Logo

Related Topics:

Posted on Dec 09, 2008

Hyundai Coupe gearbox ( not car in product)

Hi. My Hyundai coupe se 2L auto gearbox is faulty.
It is a 97 R reg.
It will drive in 1st but stays there, also the reverse has no response at all.
I have a new gearbox but wondered if it could be anything else?
Thank you
Brad.
I have Hyundai lantra 1.8l auto & 1998. It only select 1st gear & has no renerse gear. If I turn of O/D it will select 2nd but still reverse.

  • ipjbannister May 04, 2009

    Hi I have a 1997 Hyundai Coupe SE Automatic. It changes up but won't select top gear. If I have the overdrive switch on it won't change at all and drops  into neutral. The changes are smooth and the car accelerates well other than the problem described.
    Please help  

  • Anonymous Mar 18, 2014

    torque convertor repaired.clutches in gearbox replaced. when drive is selected the revs pick up. car does not move.reverse works normal

×

1 Answer

Anonymous

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

  • Contributor 13 Answers
  • Posted on Dec 11, 2008
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

Joined: Dec 11, 2008
Answers
13
Questions
0
Helped
12224
Points
33

Hi there! i was a master tech 4 hyundai, first of all has the atf fluid been changed and at the correct level. or have you had the multifuntion switch checked? please feel free to contact myself and i will advise you as required with my exsperience

many thanks

Dominic Hill

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Part number & where to source output shaft bearings for 2003 uk reg 1.6 litre manual Hyundai Coupe.

The easy way is to go to the dealership parts department. They would keep those in stock. Or you go to a spares motor factor like the ones below. They are picking up 'wheel bearings', but they can supply all bearing parts..

Wheel bearing for HYUNDAI Coupe II (GK) - Buycarparts.co.uk

https://www.buycarparts.co.uk > ... > COUPE (GK)
Hub bearing for HYUNDAI Coupe II (GK) Petrol / 1.6 - 2.7 liters / 2001 - 2009 MY ... G4GC 02/2003 - 08/2009; 2.7 V6 (121 kW / 165 hp) G6BA 01/2001 - 08/2009 ...
Missing: manual ‎' Must include:
manual

Wheel bearing for Hyundai Coupe gk - AUTODOC

https://www.autodoc.co.uk > ... > HYUNDAI > COUPE
Wheel bearing rear and front for HYUNDAI COUPE (GK) from 2001 MY from various OEM part manufacturers. Huge brand selection at low prices ? Hub bearing for ...
Missing: litre ‎output

Transmission output shaft bearing. - Hyundai - JustAnswer

https://www.justanswer.com > hyundai > 94h1d-transmi...
Jun. 3, 2015 - Transmission output shaft bearing. problem. Our 2005 Hyundai Accent stick shift. Parts errand car. Replaced CV - Answered by a verified ...
1 answer · Top answer: See the answer on the image
Missing: reg ‎' Must include: reg
0helpful
1answer

97 hyundai coupe s wont go but starts and idle fine

You have to give more and complete details what is happening.
1helpful
1answer

I've got an x reg hyundai coupe and whenever I

whats this X reg thing please does it mean its a naughty version? just use the key and dont arm the alarm if its a seperate add on alarm then cut it right out as never seen a factory alarm on this car only the immobilisor .
0helpful
1answer

Why does my auto gearbox not go into 4th when the overdrive is not on or off on my hyundai coupe se 1998

Sounds to me like u have a faulty ( pulse generator sensor) u can find it at a dealership for less than 80 dlls. it can be easly replace by anyone its : a 1 plug conector wire that divides into 2 sensors like a ( Y ) ull find it under the air filter right on top of the transmission just follow the wire and ull find the second sensor under the transmision, once replaced, i let the key to on position for 15 min to reset the computer ,and ur good to go..car runs like new again..hope this helps ... Marcos
0helpful
1answer

Air con constantly on

in the fuse panel or under the hood in the relay box pull the h.v.a.c. or a/c relay this will stop it
1helpful
1answer

Gearbox jumps from 4th to 3rd

i suspect the modulator might be faulty and mayby
trans. filter would need replacement
Not finding what you are looking for?

767 views

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...