SOURCE: 2002 saturn sl1 pcv valve
The PVC valve is located in the valve cover (top "cover" of the engine, near the oil filler cap) On DOHCs, it is immediatly to the right. On SOHCs, it a few inches to the left.The PVC valve is held to the valve cover with a rubber grommet type seat.
1. Remove the hose that connectes the throttle body unit to the PVC valve.
2. Using your hands, remove the PVC valve from the rubber seat. Wiggle it back and forth, then pull it straight out.
3. You can either clean this with carb cleaner, or simply replace it with a new one (<$5 at most auto stores)
4. Put the PVC valve back into the rubber seat and replace the hose
SOURCE: I am trying to locate the starter relay on a 92 saturn?
the starter is at the bottom back of the engine (aft of oil filter), it goes into the transmission bell housing, go to link for video of job on your car.
http://www.wonderhowto.com/how-to/video/how-to-replace-the-starter-in-a-saturn-s-series-car-263194/
SOURCE: where is the pcv valve on a 1993 saturn?
the pcv valve is on top of the cam cover,,,,there is a black hose coming off it going into the intake manifold,,that black hose on the cam cover take it off,,under there is the pcv valve just pull it out and put the new in
75 views
Usually answered in minutes!
×