Question about 1998 Pontiac Bonneville
Ac programer is fine and i have the electronic climate control module
Theirs a vacume control module under passenger side airbag that goes out
Posted on Oct 19, 2012
SOURCE: 2005 PONTIAC mONTANA-NO HEAT
Had the same problem with 03 Montana and it was the actuator assemble. It controls the hot and cold air and controls all of the other functions....defrost, floor etc...
Posted on Feb 06, 2009
NOTE: You must have the correct part number on the remote for it to work. The part number you need is 15732803.
Transmitter programming per the GM manual:
Before entering the programming mode, verify the possession of all the transmitters you will be using on the vehicle. Once you program the transmitter, the memory erases the other transmitters. You may program up to 4 transmitters.
DO NOT turn OFF the ignition . If the switch is turned OFF the first transmitter becomes inoperative.
This should work for the 1997 and 1999 Bonneville's. Good Luck. Keep me posted, be glad to answerer any other questions you may have.
Posted on Aug 11, 2009
The low side pressure seems ok the high side would help,Is your compressor cycling and is the air coming out even slightly cool?slight over charge cold effect cooling ability.I wish I could be more help. I will have to think about this one.maybe you could make sure your temp.door is actually in the commanded cold position.
Posted on Aug 26, 2009
Tips for a great answer:
May 19, 2017 | 1998 Pontiac Bonneville
Oct 30, 2015 | Cars & Trucks
Apr 06, 2015 | 1998 GMC Jimmy
Aug 20, 2014 | 2002 Pontiac Bonneville
Jan 02, 2014 | 1998 Pontiac Bonneville
Jul 10, 2010 | 1998 Pontiac Grand Prix
Jul 05, 2010 | 1998 Pontiac Bonneville
Oct 14, 2009 | 2002 Pontiac Bonneville
Sep 02, 2009 | 1997 Pontiac Bonneville
281 people viewed this question
Usually answered in minutes!