2000 Saturn SL Logo
jason kearney Posted on Jul 01, 2012

Where is fuel pump switch located - 2000 Saturn SL

1 Answer

Anonymous

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

  • Contributor 19 Answers
  • Posted on Jul 01, 2012
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

Joined: Nov 27, 2011
Answers
19
Questions
4
Helped
14748
Points
62

THEY ARE USUALLY LOCATED IN THE TRUNK, SOMETIMES BEHIND THE SIDE PANEL.(not sure what side on your car, but check both sides, they are usually on the passenger side, but not positive on your saturn) IT WILL HAVE A RED (usually red) RESET SWITCH, SOMTIMES THEY DO GO BAD, BUT IF THE CAR HAS BEEN IN A WRECK, OR EVEN SLIGHTLY "BUMPED" IT CAN TRIGGER THE FUEL TO STOP, AS IT IS A SAFETY FEATURE FOR WRECKS TO SHUT OFF THE FUEL.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

I have no power to the fuel pump and dont know what to check on a 89 Ford bronco ll

Check the fuel pump relay switch. According to a post on the Ford Truck Enthusiasts Forums, the fuel pump relay switch is located under the PDB (Power Distribution Box) . You may need to refer to the wiring diagram to locate it. If you don't have one, you can request it from the same post.

Check the fuel pump cutoff switch. This switch is located behind the firewall and is designed to shut off the fuel supply in case of an accident .

Check the fuel rail pressure regulator. If the fuel pump and the fuel cutoff switch are working fine, then the problem might be with the fuel rail pressure regulator. This is a small can mounted inline with the fuel rail with a vacuum hose attached to a hose barb on top of the unit .
0helpful
1answer

No voltage to fuel pump 2002 saburban

vehicles have a safty device that kills the fuel pump in case of a roll-over accident so the fuel will not be poured on to the car and ignite. also, this fuel pump kill switch is used when you are going to remove the fuel pump to de-pressurize the fuel line by cranking the engine while the fuel pump safety switch is off. you can restore the power back to the fuel pump by resetting the fuel pump safety (kill) switch. some are located in the trunk, by the fender well, behind the carpet. some are located inside the kick panel where the front passenger sits. check your motor manuel for that vehicle or ask a parts person at the dealership for the location of the safety switch for the fuel pump.
1helpful
1answer

1989 f-250 inertia fuel shut-off switch switch location

This should be in the owner's manual. I found the below on autozone.com, their repair help location:
An inertia switch is used as a safety device in the fuel system. The inertia switch is located in the cab, generally under the dashboard on the right side. It is designed to open the fuel pump power circuit in the event of a collision. The switch is reset by pushing each of 2 buttons on the switch simultaneously (some models use switches with only one reset button). The inertia switch should not be reset until the fuel system has been inspected for damage or leaks.
When the ignition switch is ON , it turns the EEC power relay ON . The EEC power relay provides power to the powertrain control module (PCM) and the control side of the fuel pump relay. Power for the fuel pump(s) is supplied through a fuse link or high current fuse attached to the starter solenoid (battery side). From the fuse link or high current fuse, current flows through the fuel pump relay and inertia switch to the fuel pump(s). The fuel pump relay is controlled by the PCM.
When the ignition switch is turned ON , the fuel pump(s) will operate. If the ignition switch is not turned to the START position the PCM will shut the fuel pump(s) OFF after 1 second. The PCM will operate the fuel pump(s) operate the fuel pump(s) when the ignition switch is turn to START position to provide fuel while cranking.
After the engine starts, the PCM will continue to operate the fuel pump(s) unless the engine stops, drops below 120 rpm or the inertia switch is tripped.
0helpful
1answer

95 style protege fuel kick off switch location car just cranks but no fuel , pump will not turn on .

The fuel pump relay is located under the dash on the right side of the center console.



8_22_2012_2_22_01_am.jpg
23helpful
2answers

Where is fuel pump relay is location on Ford expedition 2001 4.6

It is located in the relay and Maxi fuse box under the hood near the battery, both the fuel pump fuse and relay are in this box, the fuel pump fuse is a 20Amp and is marked #10, the fuel pump relay is is marked as relay #301.

There is also a fuel pump cutoff switch (triggered by an accident exceeding 3 G's)

The fuel pump shut-off switch is

located in the passenger's foot well,
by the kick panel.

0helpful
2answers

Ford explorer 93 where is the fuel shut off switch

For details regarding fuel pump and fuel pump switch click the link below:--- http://technoanswers.blogspot.com/2011/06/where-is-fuel-shut-off-switch-on-1993.html This switch is also called inertia switch For fuel pump reset switch location and diagram click this link below:--- http://technoanswers.blogspot.com/2011/06/fuel-pump-reset-switch-location.html ---------- This should help.Thanks.Helpmech.
7helpful
3answers

No power to fuel pump on 1999 crown victoria

Hello abzalkhan193
Heres a few things to check that could cut power to the fuel pump. The fuel pump inertia shutoff sw
in the trunk on the left side, there is a reset button on the switch if you push the button down and
you hear/feel a click then the switch was tripped and you just reset it. The switch's job is to cut off
the fuel in case of an accident. Next, the fuel pump fuse located in the battery fuse block under the
hood on the right fender well, fuse #1 20amp fuse. Next, the fuel pump relay, the relay is located in
relay center on the left fender well. Hope this is helpful.
2helpful
1answer

Does a 1996 crown victoria have a fuel pump reset switch?....and if it does where is it located??

To answer your question about the fuel pump switch...yes. The location of the fuel pump cut off switch is typically located in the upper left corner of the trunk. You may need to pull the carpet down a bit to access it. If it is not in the upper left corner, then it is probably on the right. Usually, the switch is located on the side of vehicle where the fuel filler cap is. Once you locate the switch, press down on the button...you should either feel or hear a "click".
Not finding what you are looking for?

1,633 views

Ask a Question

Usually answered in minutes!

Top Saturn Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Saturn Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...