Wiring diagram for 1995 chevy k2500 - K2500 Chevrolet Cars & Trucks

SOURCE: 1995 k2500 turn signal replacement

This is a push and turn style connector. Just push towards the light and turn. You do not have to push extremely hard. Pull out old bulb and replace

Posted on Apr 29, 2009

SOURCE: need Rear Brake Diagram for 1994 Chevy K2500 4x4

Here is the diagram,It is always a good idea to only disaasemble one side so you can use the other side as a reference,I also reccomend using a set od brake pliers,they will the disassembly and reassembly much easier.

Posted on May 30, 2009

SOURCE: Trying to get rear braKE DRUMS OFF A 1995 cHEVY

Okay, we're talking about drums and not rotors, correct?

Some drums have two tapped holes into which you can screw the proper bolt and it will push the drum off.

Before drums started appearing with these "holes", the solution was to loosen the brakes by turning the star wheel adjuster accessed through a slot in the bottom of the back of the wheel. There is a brake tool you can buy at Pep Boys for turning this star wheel. This tool makes it easier than using a screwdriver, but a screwdriver will do.

Charlie

Posted on Aug 21, 2009

Testimonial: "Thank You"

SOURCE: 2003 GMC SIERRA K2500 HD

buy a clintons repair manual at a auto store they will have a complet break down on wiring, plus so much more its worth the $20

Posted on Sep 23, 2009

SOURCE: I need a wiring diagram for a 1988 k2500 Scottdale 4wd four

Go to faxonautoliterature. They have the original GM service manual for your truck which will have all the wiring diagrams you need, including all options. They also have separate manuals just for wiring. I've used them before and found service to be excellent. Hope this helps.

Posted on Oct 02, 2009