Cruise control stopped working
A cable could have knocked loose, a fuse could have blown if water knocked in the wrong spot. wiring could have to do with it or the little device that controls the peddle line could be messed up. your best bet is to take it to a mechanic that will look at it for you.
SOURCE: 1999 town & country cruise control stopped working
2001 town & country. My airbag/seat belt light came on, cruise control and horn stopped working. Dealer said it was the "clock spring" and usually covered as a recall item.
SOURCE: multable problems
It happened to our 99 too, turned out to be inside the steering wheel. a coil that Chrysler recalled. It was a free repair at a dealership
SOURCE: 2005 town & country reading light
I have the same vehicle. when the sun comes up I will go out and look my self and get back. It should let me post a follow up.
SOURCE: 2001 Town and Country Cruise Control won't engage
Check your vacuum lines. Most of the time it is the vacuum lines, or the cruise actuator. I have seen a couple of brake switches not allow the cruise to set also. If it feels like it sets, then loses speed, it is a vacuum/actuator problem. If it is not setting at all, it could be either the brake switch, or the actuator.
SOURCE: 2002 town & country dash, instrument lights do
Not likely a bulb problem if they are all out. Check the dimmer, Check the owners manual to see what else is powered by the same fuse. See if anything else on the same circuit is not operating. If it is a fuse you probably have a spare fuse in the fuse panel. If not - a small box of fuses can be purchased for a few dollars.
590 views
Usually answered in minutes!
×