Question about 1991 Honda CRX
Pulling hood release but nothing is happening. how do i get the hood open to check oil?
SOURCE: hood latch won't release
This has happened to me several times, this will take two people, but all you need to do is have one person pull the hood release, while person number 2 pushes down on the hood, and then pulls up...that ought to do the trick
Posted on Jan 28, 2009
SOURCE: My hood wont open
use a pair of needle nose pliers and pull the cable to open the hood..im assumeing the plastic cable lever snapped or broke off... if that doesnt work, remove the left front wheel and left front fender liner and u will see the cable.. u can pull on that there as well.. first try the needle nose pliers (up to u if need to remove the wheel..i did . i have big hands.
Posted on Apr 08, 2009
NOT NECESSARILY IN ORDER: Remove the 2 nuts from the top of your shock tower under the hood - remove the pivot bolt at the bottom of your shock fork - remove the upper control arm ball joint nut - remove the lower control arm ball joint nut - bang on the thick metal near the ball joints with a hammer (not hitting the rubber or the ball joint's bolts - remove the tie rod ball joint nut and do the same with the hammer - pull the shock and spring assembly out - You might need a spring compressor to take out the stock spring safely - remove the nut on top of the shock - It's recommended that you replace your shocks now - install the new springs according to the directions with the package - get a camber correction kit for your car - put it back together and immediately go pay for an alignment. Good luck.
Posted on Oct 03, 2009
Tips for a great answer:
Jun 05, 2018 | Pontiac Cars & Trucks
Jun 12, 2014 | 1997 Honda CRX
Jun 29, 2012 | 1991 Honda CRX
Sep 13, 2011 | Honda Civic Cars & Trucks
Apr 21, 2011 | 1991 Honda CRX
Apr 18, 2009 | 1991 Honda CRX
Dec 29, 2008 | 2003 Ford Taurus
Sep 10, 2017 | 1991 Honda CRX
Sep 13, 2008 | 1991 Honda CRX
292 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: