How to remove rear bumper
SOURCE: remove the rear bumper
Removing Prowler Rear Bumpers First remove the four 10 MM bolts holding the trans cooler and drop it down. Support it by attaching one bolt to the lower hole on the cooler frame. This will keep the weight off the lines. This takes two min. and allows easy removal of the elect. lines. Then remove the four bolts on each bumper. The bolts are 13MM and 17MM. You will need a ratchet, sockets, extension and a 13MM open end wrench. If you remove the rear bumpers, you should replace the rear pan with one of the aftermarket ones otherwise you will have big holes staring at the people behind you. Go to prowleronline.com and check the vendors for a couple of options. Maybe you are removeing them to paint and reinstall. Look at this link for some options .. Mine is the 7th post down. http://www.prowleronline.com/ubb/Forum1/HTML/014949.html Hope this helps.
SOURCE: Remove rear plastic bumper cover
please email me at [email protected] with any other info or questions if you have already gone to a body shop
SOURCE: REMOVAL OF REAR BUMPER COVER ON 1997 DODGE STRATUS
See under the bumper its strap with clips,you must take it out from it,
Testimonial: "I found out there are clips on each side of the b umper under the rear 1/4 panels as well. thanks"
SOURCE: Volkswagen Passat rear bumper removal
all the screws/bolts are underneath the plastic cover.hex head.(allen key)
SOURCE: how to remove 2008 toyota yaris rear bumper
Go to this site. http://www.yarisworld.com/forums/showthread.php?t=33767
Further down you will see a diagram of the bumper removal.
remove the two bolts under the hatch, the four plugs along the bottom edge, and the plate light. Don't forget the red circle clip or bolt on the diagram. Then you just pull it off.
706 views
Usually answered in minutes!
×