The canopy fits on one side but I cannot get enough material across the top to attach it to the opposite Arch bar.
Good luck start in the middle
SOURCE: Fitting a Tow Bar
just put your tow bar up to the frame, it already has threaded holes in the frame to fit the bolts that came with your tow bar to it. It's really easy. everything should line up perfect
SOURCE: Rear speakers in audi 1999 audi a4
You don't want to fit that - it's the factory amplifier for the rear speakers (the rears are amped, the fronts are not). You need to run new wires from the head unit back to the new rear speakers so that the speaker-level outputs from the new head unit are used to drive the new speakers.
SOURCE: nissan R34 CRASH BAR
R33 bumper doesn't fit on R34. Or if you want R33 to R34 bumper, go to panel & paint to fix on fibreglass on it. It can. But lots $$$ costly.
Only engine parts can fit on Skyline family yess..
SOURCE: how do I replace a 2004 toyota sienna headlight
The bulb has to be lined up in the headlamp housing before it will fit properly,is it a 80 dollar bulb?or 8 to 15 dollar bulb?the 9006 bulb,the cheaper one has to be aligned just right,or it will not fit,and it can be difficult to do,but the 80 dollar bulb,just fits one way only.
SOURCE: how do i change the brakes and rotors on my 2004
When you say fit properly I assume you mean it's not going back together. Make sure you have the bearings and races installed correctly on the back side and that you are installing the correct rotor on the correct side with the correct bearings. The front and rear bearings look the same but they aren't and if you try putting that rotor on with the front side bearing installed in the rear of the rotor it will never go back together.
120 views
Usually answered in minutes!
×