2004 Mazda 6 Logo

Related Topics:

Wendie Winters Posted on Sep 21, 2017

2004 Mazda 6?? Help please!!

I have a 2004 mazda 6 3.0 v6, We just recently had the throttle body replaced the car ran great for two days until got in it again to leave for work and to my surprise it was doing the same thing it was before we replaced the throttle body, It bounces between the rpms 1.. But after I shut the car off and start it again it goes off but the engine light stays on!!

  • Jeffrey Turcotte
    Jeffrey Turcotte Sep 21, 2017

    Hi Wendie Winters, I want to help you with your question, but I need more information from you. Can you please add details in the comment box? What is the trouble code stored in the computer?

×

2 Related Answers

Anonymous

  • 166 Answers
  • Posted on Jun 01, 2009

SOURCE: car hesitates at different rpms in all gears on my 2004 mazda 6

Hi, it might very well be the electronic engine control system that is malfunctioning, among other probable causes. I'm not there in person, but I can help you go through the most probable causes of this accleration-hesitation problem that you have. In fact, here's a very good, handy diagnostic article exactly on your issue, detailing the six most probable causes:
http://yourhandymanzone.com/Your_Handyman_Zone_How_To_Pages_Vehicle_Car_Zone_Cars_Trucks_Vans_Engine_System_Engine_Hesitates_When_Accelerating.htm
Go through these to definitely solve your problem.
Brad

Ad
Hrnsly

Romy Kettlewell

  • 154 Answers
  • Posted on Aug 18, 2009

SOURCE: 2002 Mazda Tribute V6 difficult to start.

IT SOUNDS LIKE THE IAC VALE OR IDLE AIR CONTROL VALVE IS BAD, WHAT YOU CAN DO IS TAP ON THE VALVE. IT IS LOCATED ON THE INTAKE RIGHT BEHIND THE THROTTLE BODY, JUST TAP ON THE SILVER PART WITH THE BACK OF A SCREW DRIVER A COUPLE OF TIMES. THIS SHOULD UNSTICK THE VALVE AND YOUR TRIBUTE SHOULD RUN. THEN IT IS JUST A MATTER OF REPLACING THE VALVE. YOU CAN GET THEM FROM ANY AUTO PARTS HOUSE.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

How do I achieve idling for a V6 Mazda 626 Cronos If you don't step on the gas it shuts off

Did you swap out throttle bodies? You may need to replace the PCM if you did. I don't think there's a way to rechip but then again maybe...
0helpful
1answer

P2110, p2135, p0223, p0122

Yes the Throttle Position Sensor needs replaced.
0helpful
1answer

While I was driving my mazda 6 2004 car, stalled, I replaced, thro body, still same and did the tune up

Why would you ever replace a throttle body ?

It is just a casting & a TPS Sensor

Tune-Up --- as in spark plugs?
What would that do?

Who is doing that work on your car?
What is the real problem in some detail?
2helpful
3answers

I'm having serious problem with my mazda 6 and i dont have a clue as what is wrong with it. Everytime i turn it on it shakes very badly, rpms go up and down and wants to cut off. I have to step on the...

Hi my name is Tom and I am here to help.

I would be the last one to argue with a computer, but throttle body is a stretch. If you were not getting gas, the Mazda would simply not start.

I am guessing here but I would say that the fuel pump should be checked. I do not know if you have had a tune up lately. A 4-8 cylinder car will act the same way if 1-2 plugs are not firing or firing in the wrong order. Are you sure the wires are as they should be and the firing order is correct?

If the order is wrong, then all bets are off. The engine will pop, surge, stop, hard to start, not start at all. I would need more info to be of more help. I can solve your problem, but I need more info from you.

Please call or email me so we can solve this together. Either way, please let me know what your outcome is. Also, please rank my suggestions. This way I can become a better helper for you and others in the future.

TomE(414-475-5968)
1helpful
1answer

Can i replace my mazda 6 2.3 v4 for a 3.0 v6

Not unless you have the whole other complete car to swap parts from. starting with the wiring harness.
10helpful
1answer

2004 Maxda 6 sputtering

hey, I own an 04 v6 mazda 6 as well and recently had that same problem. Its an ignition coil. The thing is that you have to wait until the check engine light comes on to know whick cylinder it is. I replaced all my spark plugs and boots all at once thinking it would solve the problem but it didnt work. It takes a while for the light to come on so what I did was to push my engine and make it come on. Hopefully its one of the the three coils in the front or else it would be a pain to get the back three. Each coil will run you about 50-80 dollars. Call me if you have any questions. My name is Carlos.786-210-1493
1helpful
2answers

The car is sputtering at high rpm

Hello, I would change the fuel filter especially if it's never been changed to your knowledge and if the car runs great up untill 4200rpms. If the filter is starting to plug then it will fell boggy and possibly jerky because the motor is being starved for fuel.
Not finding what you are looking for?

281 views

Ask a Question

Usually answered in minutes!

Top Mazda Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...