It is a carburator Golf
Hi does anyone now the talk settings of a golf Mk1 1.6 caburator mains ,big ends,bearings and headcylinder please
You will need to carry out these steps for optimal settings
• 1st stage 40nm-wait for five minutes
• 2nd stage 60nm leave 5 mins
• 3rd stage 90 degrees leave 10 mins
• 4th stage 90 degrees
SOURCE: looking to find out the torque settings for a golf
give these websites a try www.autozone.com and www.alldatadiy.com if all fails stop by your local library and get your hands on a Haynes auto repair manual for your car wish you the best of luck Michigan Man.
SOURCE: golf iv 1.6 8v cylinder head torque settings
hi to tighten you have to do it in 4 stages as follows
1st stage 40nm leave 5 mins
2nd stage 60nm leave 5 mins
3rd stage 90 degrees leave 10 mins
4th stage 90 degrees
then you are done i will try put order on here i hope this works as follows
10 4 2 6 8
front of engine back of engine
7 5 1 3 9
in that order hope this helps
8,808 views
Usually answered in minutes!
×