Replace shift cable 1997 Explorer Automatic Trans. 4wd
Start at the throttle linkage and disconnect there follow routing of old cable and place new one in same was old cable and finish at the transmission, suggest a chilton or hayes repair manual with diagrams and step directions, and helps with future repairs, auto stores around $30
SOURCE: 4WD shift problems
Some one told me to unhook the batery for half an hour then hook it back up and try it. Well it worked,no more shif problems.
SOURCE: I need a diagram for 1994 ford explorer transmission
hey whats up go to any auto parts store and ask them for either the haynes book or chilton book for your vehicle
SOURCE: 98 Ford Explorer won't move in reverse
Sometimes it may just be the fluid level, if you have drive , drive it around the block a few times, then park it on level ground and hold the brake and go through all the gears slowley, two times. put it in park, open the hood and check the fluid level, the dip stick in the back by the fire wall, take it out and clean it, read the stick. SOME need to be checked in Nutral, if this is the case do so but be carefull that the truck has stopped moving when put in nutral!!! if it is low only put in the right fluid, and a little at a time, while it is still running DO NOT OVER FILL !!!!!!!! Also sometimes it is a SENSOR problem, and in most cases not to hard or costly to replace.
SOURCE: ford explorer gear shift problem
needs shift tube bushings... you have to pull the steering column down to replace the bushings and put the screw back in the shift tube
710 views
Usually answered in minutes!
how do you change automatic shift cabale
×