How do you remove the glove box on a 1999 4Runner?
SOURCE: Heater unit access and removal 1995 toyota corolla
theres a box behind the glovebox it should be cyclindrical in shape with three skrews in the bottom of it remove these and the heater motor will fall out
SOURCE: The lower glove box on my 2009 Rav4 won't close.
I had the same problem with my 2009 RAV4 lower glove box. I removed the box by popping the top front right post and then the top left front post from theside housings by prying them free with my fingers. They pop out easily. I then let the box fall open and while holding it level to the floor, pulled forward, released the piston from the post on the right, and the glove compartment came out without tools. There was a plastic electrical box cover, which came loose behind the glove box, blocking it from closing. I snapped the cover plate back in place and then reversed the glove box removal process. It took a few minutes and I needed no tools.
Remove the battery cover to access the battery terminals. Disconnect the negative (-) battery cable with the pliers.
Open the glove box door and squeeze the outer part to remove the door. Locate the two screws behind the door to remove the glove box.
Lifetime Warranty Engines & Trans. Same-day turn around.
www.avproecm.com
Access the ECU behind the glove box. Remove the electrical connectors by hand; remove the bolts mounting the ECU to the inner dash.
Install the new ECU in the same position. Replace the bolts and reconnect the electrical connectors.
Replace the glove box and the glove box door. Reconnect your battery.
563 views
Usually answered in minutes!
×