I allready check the break padel switch and bulb they are good
Does the third brake light work?
If it does the get a test light and check the circuit inside the brake light. it can be the circuit board or the pig tail the not getting connection.
SOURCE: 1998 gmc sierra brake lights
did u check that they not burn?if not you should Check the wires going into the steering column if you don't have separate turn signal lights and brake lights because if they use the same bulb then the turn signal may be bad. If I remember correctly that particular car doesn't work this way, but I include it just in case.
SOURCE: brake lights won't work. tail lights do. I
need to know if your third brake light up high is working or not.if it isn't,you need to check the brake light switch on the brake pedal with a test light,one side hot all the time,the other side should turn hot when brake pedal is pushed.
SOURCE: NO REVERSE LIGHTS 1999 K2500 CHEVY SUBURBAN-NEW
move the gear selector back and forth between neutral and reverse, but not all the way. have the same problem
195 views
Usually answered in minutes!
check the fuses and see if one is blown
×