Question about 2007 Toyota Camry
My factory cd player has been showing an error code 1 every time I put a cd in. The FM radio itself works just fine just the cd player wont work.
Posted by Anonymous on
Having a similar issue. I insert a disc and it says reading disc and just keeps blinking that. Never plays. I push eject and disc will come out. This happens with all discs. Will try laser lens cleaner thing.
Posted on Mar 08, 2019
I had the error code no. 1 in my 2007 Toyota Camry Hybrid. It has the CD radio unit with JBL system. It will not eject the CD, or play it. I removed the entire radio/CD unit and replaced it with a used excellent unit bought off of ebay for $100, and the replacement works fine. However the replacement is also 7 years old. Therefore I would not be surprised if it failed again. Prior to the error 1 I had intermittent error 3 codes, which had the same effect: no playing of the CD, unable to eject, and unable to insert other CDs. Sometimes the error codes would go away, and the function would be normal. But once it started, I think it was on a downhill path. A new replacement is nearly $2000. Used are about $100 to $200 or more depending on the seller and condition of the unit. Youtube has videos on how to replace the unit which only requires simple tools: it is not difficult but takes about 45 minutes to an hour. If you do it you have to put the car in gear to move the gear shift gate, which requires the car to be on, so you should have the parking brake on for safety. One alternative is to send your unit to a repair company but that might cost more than simply replacing the unit. Good luck!
Posted on Jul 25, 2013
Error one indicates a bad laser pickup, or a calibration issue. I would recommend a CD cleaner, but, if that does not help, the radio will need to be taken to an authorized service center. The 01 code is rather common to those radios.
Posted on Oct 09, 2009
U don't have to remove anything, just get a laser lens cleaning disk from any store that carries music CD's Walmart has them for about $6
Posted on Mar 22, 2009
SOURCE: Radio/CD player Wiring
Here are the correct factory radio wire colors with definitions.
Car Radio Battery Constant 12v+ Wire: Blue/Yellow
Car Radio Accessory Switched 12v+ Wire: Gray
Car Radio Ground Wire: Brown
Car Radio Illumination Wire: Green
Car Stereo Dimmer Wire: N/A
Car Stereo Antenna Trigger Wire: Black/Red
Car Stereo Amp Trigger Wire: N/A
Car Stereo Amplifier Location: N/A
Car Audio Front Speakers Size: 6 1/2′
Car Audio Front Speakers Location: Doors
Left Front Speaker Positive Wire (+): Pink
Left Front Speaker Negative Wire (-): Purple
Right Front Speaker Positive Wire (+): Green
Right Front Speaker Negative Wire (-): Blue
Car Audio Rear Speakers Size: 6 1/2′
Car Audio Rear Speakers Location: Side Panels
Left Rear Speaker Positive Wire (+): Black
Left Rear Speaker Negative Wire (-): Yellow
Right Rear Speaker Positive Wire (+): Red
Right Rear Speaker Negative Wire (-): White
Posted on Oct 17, 2008
Hello, and welcome to FIxYa.
To erase the check engine light on a 1994 Camry, open the hood, and, in the engine compartment fuse box, remove the blue 15 amp EFI fuse for one minute. This will clear the codes. If you have a hard code; ie a malfunctioning sensor, the light will come right back on.
Thanks for choosing FixYa for assistance.
Posted on Mar 12, 2010
Tips for a great answer:
Apr 02, 2015 | 2003 Honda Odyssey
Dec 16, 2012 | Cars & Trucks
Nov 12, 2012 | 2004 Kia Sorento EX
Jan 27, 2011 | Mercury Monterey Cars & Trucks
Oct 12, 2010 | 2003 Chrysler Town & Country
Jul 28, 2017 | 1998 Volkswagen Jetta
Apr 23, 2009 | 2007 Honda CR-V
Jan 31, 2009 | 2003 Chevrolet Malibu
May 17, 2008 | 2000 Renault 181
5,042 people viewed this question
Usually answered in minutes!