2008 Chrysler Sebring Convertible Logo

Related Topics:

Chris Posted on Apr 11, 2017

2008 Chrysler Sebring convertible starting problem.....

Turn the key and you'll here "click, click, click." Now jump the battery and it starts. Altough I didn't think it was the battery I replaced it anyway (after 5 years it's a good idea-bought the car in July '07). Car has 34,000 miles. Still the same promblem, however. Just "clicks" but will start with jump and continue to restart WITHOUT a jump for hours but wait longer and it reverts to "clicks." So...it's not the battery, not the starter and if it's some kind of solenoid or fuse why is there this mysterious time delay? THANK YOU in advance!

2 Related Answers

Anonymous

  • 521 Answers
  • Posted on Aug 19, 2008

SOURCE: 1985 Chrysler Laser non-turbo, automatic

http://www.automotix.net/autorepair/repairtips/.

Ad

Anonymous

  • 8 Answers
  • Posted on Jul 10, 2009

SOURCE: 2002 Chrysler Sebring Convert wont turnover

If you're not hearing a click from the starter check for a starter relay. May be burned out! DO you hear the fuel pump kick in when you turn the key on? If not something might have triggered your security system and locked you out!

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
2answers

My 2002 chrysler sebring 2.4L will not start turn key and hear no clicking noise nothing at all, lights and horn work , when i jumped the battery it did nothing no clicking. what should i try next?

Check if you have power at the starter from the ignition key
Try give direct power to the starter, if still not starts, you have a bad starter
1helpful
1answer

Car won't start

U might have 12 volts but no cranking amps try a jump start
0helpful
1answer

2000 Chrysler Sebring w/year old battery.  Advise, what could have occurred when AAA jump me???  Left tiny interior light on under my mirror--battery dead.  After AAA came, I let it run

I doubt the service person did anything wrong. In today's cars with both engine and body computers, jump starting a car can be risky.
You're better off having the battery charged for an hour or so then trying to start it.
You may have to have the body computer scanned and possibly flashed to get everything working again. The body computer controls everything you mentioned. It could have lost some of the factory programming when the system was dead.
0helpful
1answer

Passenger window wont roll up.......fuse/relay is good....window motor is good..module is good.......tested and got a ul 1110 and ul 1120 codes ...what is this ? 2008 sebring convertible / chrysler

IF THE PASSENGER WINDOW SWITCH IS BAD IT WONT WORK FROM EITHER SIDE HAS TO BE A COMPLETE CIRCUIT.IF YOU MANUALLY JUMPED WINDOW MOTOR WITH A BATTERY AND TWO WIRES ,I WOULD START THEIR.OR IF THE DRIVER WINDOW SWITCH IS BAD SAME THING
0helpful
1answer
0helpful
1answer

2001 Sebring convertable, 3.3L, Turn the key

you have a crossed wire thats blowing the fuse. Check all wires to the starter also to the fuse box and to the battery
0helpful
1answer

2002 Chrysler Sebring Convert wont turnover

If you're not hearing a click from the starter check for a starter relay. May be burned out! DO you hear the fuel pump kick in when you turn the key on? If not something might have triggered your security system and locked you out!
0helpful
1answer

How do i change the digital clock on the 2008 sebring?

there should be a "H" and a "M" on the console with a small hole beside it,use a pen to push the recessed buttons
Not finding what you are looking for?

132 views

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...