What are the front caliper torque specs for a 2002 chevy tracker

Really need to know what? That search his normally the torque that the engine produces on the road.

2006 Chevy cobalt 2.2 L engine torque specs for - Fixya

https://www.fixya.com > Forum > Cars & Trucks
Jan 9, 2018 - Tighten to 40-50 Nm (30-37 lb-ft). Rotate an additional 175-185 degrees. Go to next bolt in sequence. Short Bolts: Tighten to 20-30 Nm ...
Torque specs head bolts 2006 chevy cobalt 2.2 ecotec - Fixya
May 12, 2013
need head bolt torque specs for 2005 chevy cobalt 2.2l ecotec
Sept 1, 2019
I need bolt torque specs for a 2006 chevy cobalt - Fixya
Nov 17, 2009
Torque specs for a 2006 Chevy cobalt - Cars & Trucks - Fixya
Feb 10, 2022
More results from www.fixya.com

Torque Specs!! - Cobalt SS Network

https://www.cobaltss.net > ... > General > General Cobalt
Apr 13, 2017 - General Cobalt - Torque Specs!! - Well.. I just received some things and was wondering on some torque specs. ... CobaltSS422 , 09-01-2006 11:37 PM.
Wheel lug nut torque spec? - Cobalt SS Network
Aug 8, 2010
2007 cobalt 2.2l. ls. Cylinder head bolts torque?? - CobaltSS.net
Aug 28, 2014
Lugnut torque specs - Cobalt SS Network
Sept 29, 2015
Exhaust manifold bolt torque specs - Cobalt SS Network
Apr 15, 2017
More results from www.cobaltss.net

Torque Specs, Fluid Capacities ' Chevy Cobalt Forum

https://www.yourcobalt.com > ... > Problems and Service
May 15, 2010 - straight from gm global connect! Approximate Fluid Capacities The following approximate capacities are given in English and metric ...
How To: Replace Your Wheel/hub Bearing - Chevy Cobalt ...
May 5, 2010
Wheel Studs ' Chevy Cobalt Forum
Mar 20, 2012
How-to Replace Lower Control Arms ' Chevy Cobalt Forum
Mar 5, 2013
Transmission/Motor Mount Torque ' Chevy Cobalt Forum
Jun 15, 2018
More results from www.yourcobalt.com

Chevrolet Lug Nut Torque Specs Table - Sparky Express

https://www.sparkyexpress.ca > blogs > autoverse > che...
Model Trim Year Range Torque ASTRO ALL / MINIVAN 1985 ? 2002 100 ft?lbs ASTRO MINIVAN / BASE/LS/LT 2003 ? 2005 140 ft?lbs AVALANCHE 17"BASE / LS 2002 ? 2013 140 ft?lbs

Tight enough to compress the sealing washer. Not enough to strip the threads. Some parts don't need a torque setting.

33 foot pounds is the answer.

Torque Specs for Brake Caliper Bolts - Chevy HHR Network

https://www.chevyhhr.net > forums > torque-specs-brak...

Apr. 23, 2017 - Brake hose-to-brake caliper bolt to the brake caliper, tighten the bolt to 44 N·m (33 lb ft). Been away on vacation, thanks ChevyMgr for the info!! ChevyMgr's ... Need Torque spec's for front brake job - Chevy HHR Network
Oct. 1, 2008
Front brake caliper bolts on 2010 1LT - Chevy HHR Network
Apr. 23, 2017
Tightening Torque Values for Common Maintenance Items
Apr. 23, 2017
Turbo coolant banjo bolts torque specs - Chevy HHR Network
Dec. 24, 2018
More results from www.chevyhhr.net

Slide bolts 70lbs lug nut 100lbs.

Less than 177 lbs are better.Caliper 70 lbs.

Chevy Truck Front and Rear Suspension Specifications Fastener Torque...

1. Torque Specs For F250 Caliper Bolts - Diesel Forum - TheDieselStop.com

   www.thedieselstop.com > ... > 1999-2007 General Questions Jan 13, 2009 - 3 posts - ‎1 author
   Does any one know what the caliper bolts torque specs are? ... Disc brake caliper pin bolts - Excursion, F-250/F-350 with Ford and Dana axle ... Torque specs for front brakes
   5 posts
   Mar 12, 2009
   05 F250 brake torque specs please
   6 posts
   Aug 22, 2007
   Brake caliper torque specs
   5 posts
   Jul 14, 2007
   Front brake Caliper Bolt Torque
   6 posts
   Apr 25, 2005
   More results from www.thedieselstop.com

First you want to remove brake fluid from brake resovoir, raise front wheels off ground and set park brake or block rear wheels. Remove front wheels, keep steering wheel unlocked so you can turn rotors side to side. Loosen bolts that hold caliper end gently pry caliper free from rotor, remove caliper and remove pads, use bungy cord to hang caliper away from rotor, have rotors measured to see if they are thick enough to have machined, replace if out of specs. Match up pads with old ones, use anti- squeak red liquid and put layer on back of pads, let dry. Use tool to put pistons back into calipers, slowly put pistons back into bore while opening up bleeder screw so ABS won't be damaged. After rotors resurfaced, wash with rubbing alchohal to remove any oils from hands, install rotors and reverse putting pads back onto caliper and reinstall, torque caliper bolts to factory specs and tighten bleeder screws. Install wheels, torque lug nuts to factory specs and replace brake fluid in resovoir. Lower car carefully to ground and press brake peddle without pumping it. Any air in system should bleed out, if not get someone to help with bleeding system. Road test to ensure no squeaks or pulling, burn brakes in slowly.

2010-2017 Equinox

FRONT brake caliper BRACKET bolts Torque is 140 FT/LB and Caliper to the bracket is only 20 FT/LB.

REAR brake caliper BRACKET bolts Torque is 92 FT/LB and Caliper to the bracket is 20 FT/LB.

Remember rear bracket torque is different so don't forget as many DIY mechs snap that rear bracket bolt.

Use Thread Lock on caliper BRACKET Bolts.

THE LUG NUT TORQUE SPEC - 140FT/LBS\
CALIPER MOUNT - 80FT/LBS
CALIPER BRACKET 129FT/LBS
AXLE NUT 177FT/LBS