Question about 2004 Jeep Grand Cherokee
Power windows driver side (front and rear) do not work, power lock on drivers door does not work, rear works. Passenger side front and rear power windows and locks work. Power side mirrors work. Driver door does not lock or open with remote, all other doors lock and open with remote. Harness wires thru driver door boot are all okay and not broken. Did repair black harness wire 1 year ago, repair is fine. All was working fine until driver window was rolled down and then 2 power window problems and driver door lock problem occurred. Driver door power window will now not go up and rear driver side door will not go down or up. Others ok from driver door switches.
I had same problem on my jeep i disconnected the battery then reconnected everything worked fine after that
Posted on Nov 25, 2008
It moves but is all ?
Posted on Sep 13, 2013
CONTACTS UNDER PUSH BUTTONS MAY NOT BE MAKING CONTACT . HAVE CHECKED, MAY NEED TO REPLACE PUSH BUTTON SWITCHES ALSO HAVE CIRCUIT BREAKERS CHECKED THAT CONTROL WINDOWS AND DOOR LOCKS USUALLY LOCATED IN FUSE BOX
Posted on Jun 29, 2013
SOURCE: the passenger window in my
All you need to do is gain acess to all wiring you need to
check out & possibly repair
You may have to remove the door panel
You can match up wire colors if they are worn
or completely separated
You won't need a diagram or wiring shcematic to do that
If you strip a wire that is broken & need to solder it,& it
is too short,you can add the correct size or gauge wire
at that time
Once you get to the wire and find the problem all you
need is good soldering skills,that part will be the most fun
Posted on May 23, 2011
Tips for a great answer:
The driver door module (DDM)
The passenger door module (PDM)
The rear door module (RDM)
The LH front power door lock switch
The RH front power door lock switch
The LH front door lock actuator
The RH front door lock actuator
The LH rear door lock actuator
The RH rear door lock actuator
The remote control door lock receiver (RCDLR)
The power door serial data circuit
The class 2 serial data circuit
The DRVMDL Fuse - 10 amp
The PDM Fuse - 10 amp
The RRINMDL Fuse - 10 a
Class 2 and Power Door Serial Data Links
The class 2 and power door data circuits are both serial data links. The serial data circuits replace cables in the vehicle by multiplexing (time-sharing) data to and from each device over a single wire referenced to ground. If the power door serial data is lost, both the rear door module (RDM) and the passenger door module (PDM) enters the sleep mode. With the RDM and the PDM in sleep mode, no power door operations are possible.
Your best bet is to take it to the dealer or an ASE certified repair shop .
Feb 20, 2016 | 2003 Buick Park Avenue
Oct 25, 2015 | 2006 Saturn ION
Jul 17, 2012 | 2004 Oldsmobile Alero
Doors not getting open with remote or key problem,there are help
links provided below.Click the link below to go through its
procedure and troubleshoot the problem:----
drivers side front door will not open from inside or outside?
Car door will
All power door
locks not working ?
Door lock Actuator?
How to Access car door panel?
Vehicle door panel components?
Truck Door will not close?
Where is Cars Door control Module located?
Power door locks not working?
Door ajar light stays on?
Door locks not working?
Front Door dis-assembly diagram?
Rear Door dis-assembly diagram?
How to test Power door locks?
Doors will not open with Remote?
How to replace
Door Hatch ?
How to remove Doors?
How to Replace Doors?
not unlock Rear door?
Door locks or windows not working on car?
This will help.
Feb 11, 2012 | 2000 Jeep Cherokee
Mar 04, 2018 | 2008 Chevrolet Avalanche
Jun 30, 2017 | Jeep Grand Cherokee Cars & Trucks
Aug 02, 2010 | 2001 Lexus RX 300
Sep 06, 2017 | 1999 Jeep Grand Cherokee
Jan 28, 2009 | 1999 Mercury Villager
4,996 people viewed this question
Usually answered in minutes!