SOURCE: How to program 2002 i35 infiniti keyless remote?
The procedure goes like this. First get in the car and lock all the doors. Secondly insert and remove the key repeatedly until the turn signal indicators on the dash flash twice simultaneously, it should be like seven or eight times. Then turn the key on and press the lock button on the remote and the lights should flash again. After that turn the key off and manually unlock and open the drivers door, then shut it. Wait a few seconds then try the remote.
SOURCE: how do you get at the radiator drain plug on a
Hi...
This picture should help you.
Thanks
Smith
SOURCE: How do I replace my cam sensors and crank sensor
simple check to see if is the bank 1 or bank 2 cam sensor
do you a code for cam sensor
SOURCE: leaking rack and pinion steering unit in a 2002
The only way to repair a leaking rack and pinion is to replace the rack and pinion with either a new or remanufactured unit. (Nobody sells rebuild kits for them like they used to several years ago.)
AutoZone lists a remanufactured unit for $452.99 plus a $115.00 core charge. Click HERE for more information.
If you are having a professional shop do the job, they will most likely charge you the standard labor time multiplied by the shop labor rate + alignment charges. This can vary considerably depending on the area where you live and what shop you take it to. The standard labor time to perform rack and pinion replacement on your vehicle is 5.5 hours. (Does not include alignment)
The labor rate in my area averages about $95 per hour. A wheel alignment can be done for about $70.
The total job would run $1045.99 + taxes and charges for shop supplies, which would put it right in the neighborhood of $1100.00.
54 views
Usually answered in minutes!
×