Where do the plug wires go to on my 1998 toyota 4 runner
I have a 98 toyota 4 runner. While changing the spark plugs I don't remember which plug wire goes to which coil pack on the passenger side. I need to know from front to back on the drivers side to fron to back on the passengers side. can you help??
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Have you tried replacing the spark plugs and wires? Are the coils giving STRONG blue/white spark, or a weaker yellow/orange spark? Are the wires arcing (try running the car at night with no lights and look for sparks around the wires/plugs)?
I've had the same problem with 2 other vehicles. You might want to check to see that you have GOOD plugs and wires. I have had 2 mechanics install cheap plugs and wires and they arc (short out) frequently against the engine block. Have your mechanic install high performance NGK plugs and wires and make sure they are not touching the engine block. They are a bit more expensive, but honestly, you will save the difference in fuel cost in the first couple of weeks. I did this in my last 2 vehicles and not only did they run much better, they performed better and got significantly better gas mileage. When I bought my 4runner, it was the first thing I looked for, and they were already installed. It runs like a dream.