Question about 1989 Ford Crown Victoria

What size are my brake lines on my 89 Ltd crown Vic

4 Related Answers

Anonymous

2 Answers

SOURCE: replacing the starter on a crown vic

I mount bolt is a RELLY hard to remove. Pay the money and have a mechanic do it on a lift.

Posted on Oct 22, 2008

Anonymous

52 Answers

SOURCE: My '89 Crown Vic keeps blowing brake light fuses.

check under the dash st the brake pedal,there is a brake light switch which is tied into the cruise control,you could try unplugging that and see if it fixes the problem(remember you will have no brake lights while it's unhooked) if the problem is gone replace the switch.

Posted on Apr 30, 2009

Anonymous

161 Answers

SOURCE: 97 crown vic turn signals , emergency flashers and brake lights d

have the multifunction switch checked and the flasher.

Posted on Jun 15, 2009

Moe

335 Answers

SOURCE: Need a fuse panel diagram for 91 Crown Vic.

Try this site
http://www.eautorepair.net/

Posted on Jul 14, 2009

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

1 Answer

1987 thunderbird computer reset

87 Thunderbird and 89 crown vic can use the same computer if they both have the 5.0, the numbers do have to match on the computer, a taurus 3.0 computer is not compatible.

Jul 05, 2012 | 1987 Ford Thunderbird

1 Answer

How to install front brakes on 89 Crown Vic

loosen lug nuts. jack car up. Take wheel off. take the 2 bolts out of caliber. then remove the caliber from rotor and then remove the brake pads. push back piston with piston pushing tool. insert new brakes into caliber and return the caliber onto the rotor. put the 2 bolts back in and return wheel by tightining in a star order and you are now ready to roll

Sep 11, 2010 | 1989 Ford Crown Victoria

1 Answer

I need a diagram of the firing order distributor cap for a 1991 Ltd Crown Vic 5.0

1991 Ford Crown Victoria
5.0 liter V-8 VIN "F"

Mar 31, 2010 | 1991 Ford LTD Crown Victoria

2 Answers

I have 1989 ford crown vic ltd I have no running lights. All other lights work brake,reverse,signal just my back running lights what could be the problem?

sounds like a bad plug or conector

Jan 22, 2010 | 1989 Ford Crown Victoria

2 Answers

How long should it take to repair a brake line on a 1994 crown vic

about an hour-which includes replacement,bleeding,and testing

Dec 06, 2009 | 1994 Ford Crown Victoria

1 Answer

Need a schematic for the computer in a '86 Ford Crown Vic LTD

Under hood, driver side, upper firewall, mounted above power brake booster. You can buy the diagram for the engine at several places online.

Nov 20, 2009 | 1986 Ford Crown Victoria

1 Answer

I want to know what tools i need to change my disc brakes and how to do it on my 1991 ltd crown vic

Tools:

10" C clamp- for compressing caliper
Socket set- 12mm or 13mm ( Might be a 10mm) for unbolting caliper from the bracket.
Screw driver- To pry up on caliper if needed to get off brakes.

How to:
1. remove tire
2. Unbolt the Caliper- bolts are located on the backside of the caliper
3. Might have to use the screw driver and pry up on the caliper to get it off the brake pads.
4. Remove brake pads from brake pad bracket
5. Install new brake pads
6. Compress caliper piston with C clamp all the way in.
7. Re- install caliper and the 2 bolts you took out
8. Start car and pump brakes several times.
9. Put tire back on car.

Oct 31, 2009 | 1991 Ford LTD Crown Victoria

1 Answer