Question about 2001 Toyota Echo

1 Answer

Toyota echo no low beams only.

2000 Toyota Echo. No low beams. changed dimmer switch. old one had burnt spot on low beam hot/ground wire. Where is Headlight relay with no DRL?? if i ground blk/wht wire low beams will work. both bulbs good, and also both 10 amp fuses. Im stumped.

Posted by Anonymous on

Ad

1 Answer

sempron

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Champion:

    An expert who has answered 200 questions.

  • Toyota Expert
  • 276 Answers

There should be separate relays for your headlights inside the fuse panel under the hood drivers side fender

Posted on Jan 30, 2018

Ad

5 Related Answers

Anonymous

  • 507 Answers

SOURCE: 2006 Toyota Camry....headlights will not come on;

there was a recall on the headlight switch up to 06 camrys,find out if your car is affected by calling Toyota with the chassis no,and month of build

Posted on Nov 01, 2009

Ad
ourhowse

Dar

  • 2007 Answers

SOURCE: How do you change the headlight bulb (low beam) on

You should be able to access the buld holder from the rear of the headlight. It's a nylon bulb holder with a lock thing on it. You squeeze the lock part and turn it counterclock wise, and it should come out. Remove the old bulb and install the new one being careful not to touch the glass of the new bulb with bare fingers. The finger print you will leave can cause the bulb to prematurely die on you.

Posted on Jun 15, 2009

Ted Schore

  • 7353 Answers

SOURCE: low beam drivers side doesn't light; high beam

Looking at the diagram, you dont say if you car has Daytime Running lights or not. The Black/White wire is gounded to make the low beam work. Ground that wire to confirm if the socket and bulb is good. If you ground the wire and the bulb works, there is a juntion block where the wire turns frm Black/white to Red/blue but I donr know how to tell you where it is. The headlight switch may be bad.

Posted on Nov 05, 2009

david dixon

  • 740 Answers

SOURCE: 1998 toyota rav 4. right side low beam headlight

sounds like there is a broken wire. the only advise i can give you is to follow the hot wire for that light untill you find the break in the wire.

Posted on Dec 25, 2009

Anonymous

  • 66 Answers

SOURCE: headlighbeamt cannot work on high beam

It could be in the switch for the low and high beam's

Posted on Mar 06, 2010

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

My daytime running lights and low-beam headlights on my 2000 Toyota Echo suddenly stopped working. We heard it may be a headlight relay but don't know where to find this. Can you help

3ca7cf82-d811-418b-9377-08cf82dfd1e9.gifthis is the main light diagram Low beam d7ad76e0-152b-4f0a-91dd-397384eb795b.gif this is the diagram for the daytime running lights. fc54af4c-df0d-40d0-aeef-6171dda7c215.jpghope this helps... there have bee a few reported problems with the radio blowing and then the light go out if the radio is fine it could be a fault with the LED control relay if this blows it can blow the 10amp fuse for the lights. you need to get the right relay as there are two types touch and none touch. tast one this is were all the units are 8237dd51-a3bb-4248-bfce-ef01d4b805d7.jpg
0helpful
1answer

My low beams in a 1993 toyota pickup are not working. the high beams do, all other lights do as well. there is power going to all three ports in the headlight plug

Of the three wires going to the headlight bulb, one should be a ground.
If you unplug the connector you should have power on one wire for low and one for high, and one should be the ground.
If you have replaced one of the bulbs and know it is good, I would look at the dimmer switch, the headlight switch and the ground circuit.
1helpful
1answer

Only my highbeams work. Low beams are not working at all. All parking lights are working.

this could be the headlight dimmer switch not switching the power back to the low beam side of the the switch,when operating the dimmer switch do you hear a click that the switch will make when changing from low to high,it you don`t this indicteds a bad switch also.make sure the low beams haven`t burnt out also(it happens)this can be done by powering up the low beam filament and suppling a ground to the ground on the bulb itself(direct feeding of the bulb).if your not sure which filament you are checking out move the power wire to the other terminal and note the difference in brightness.
5helpful
2answers

Only hi beams work ...no low beams . Lamps and fuses are good. Replaced relay, no change. Keep reading about ground wire from lights can not find it

The wiring schematic changes drasticly depending on whether your vehicle is equipped with daytime running lamps or not. However, both systems have one thing in common...the low beams and the high beams get their grounds from the same place. If the high beams are working correctly, the ground is not your problem. The most common causes of low beams not working and high beams working are the multifunction switch (or as Toyota calls it: "Combination Switch") and if your vehicle has daytime running lamps, the Daytime Running Lamp Module could be the problem.
0helpful
1answer

Low beam head lamps don't work

From cheapest/most likely to more expensive: Replace fuse; Replace bulbs; Replace DRL Relay; Check the Ground/Low beam wires for shorts or cuts, Replace Headlight control Switch. Also make sure to check the dimmer relay, its easy to tell if your relay is bad, they will buzz and get hot if defective
4helpful
2answers

Low beam drivers side doesn't light; high beam does; changing bulb does NOT fix the problem: toyota echo 01

have you looked at all the fuses,, and any relays,, it could even be a bad earth on the light itself or a bad buld holder if its got hot and burnt away, there are a fuw things to look at
0helpful
1answer

Low beams not working on 2004 Toyota Tacoma

check your multi function switch (headlamp / dimmer / signal) check for power on outlet side of connector to both hi and low beams. sidebar- I have seen both low beam elements burn out together, but if you have replaced both bulbs not the issue, if not give it a shot, stranger things have happened.
Not finding what you are looking for?
2001 Toyota Echo Logo

Related Topics:

1,568 views

Ask a Question

Usually answered in minutes!

Top Toyota Experts

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6929 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14970 Answers

Greg Bernett
Greg Bernett

Level 3 Expert

2993 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...