Question about 1998 Audi A6
SOURCE: thermostat audi a6
look under car on water pump housing, the thermostat is on a metal housing that looks like an igloo and has to bolts perhaps 10mm or 13mm, and an "O" ring in between
Posted on Jan 23, 2009
IF YOU DON,T KNOW WHERE THE OIL&AIR FILTER ARE.IT WOULD BE BETTER FOR YOU TO TAKE THE CAR TO A LOCAL GARAGE AND GET THE WORK DONE THERE PLUS REPLACE THE OIL.WILL NOT COST MUCH.(GET A PRICE FIRST)..JUST KEEP BACK FROM AUDI DEALERSHIP GARAGES COST TO MUCH MONEY..
Posted on Mar 26, 2009
The problem with this wiper blade set up is the slides get jammed up w/ crude. You should lubricate the slides and they should slide off. Then carfully lift the arm and remove the blade. Warning you should never leave the arm in the upright position. Windshields get cracked this way. Also note the pivit points the blades attach too. These will normally sieze up and cause clearing issues even with new blades. Lubricate these pivit points and use a pair of channel locks to move it back and forth until it will go 360 degrees with your fingers. Install is in reverse order of removal.
Posted on May 28, 2009
Tips for a great answer:
Nov 07, 2016 | 2001 Audi A6
Jan 07, 2016 | 2005 Audi A6 3.2
Mar 15, 2015 | 1999 Audi A6
Jun 10, 2014 | 2007 Audi Q7 4.2 FSI
Nov 02, 2011 | 2001 Audi A6
Jun 28, 2017 | 1998 Audi A6
693 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: