Have the 1130 code and need pointers on finding the part that might be bad. Think it can be the swirl control valve control solenoid valve, or the vias control solenoid valve, or the swirl control valve control vacuum check switch, and maybe clogged hoses. Would like to not buy all parts to see if the code goes away. What is the most common part to go out with this code? What is the part number?
I think the code you are using is correct but the way you are using is wrong so i suggest you to visit the link give this link help a lot to me http://toolsnyou.com/
SOURCE: Pls where is Swirl Control Solenoid Valve located in Infiniti QX4
This link shows the location of the SCV, If your motor is different the location should be similiar. http://img510.imageshack.us/img510/5687/vacuumdiagramuh3.jpg
There's a vaccuum line that runs off the SCV to the SCV check switch.
P0442: Have you inspected the lines, charcoal cannister etc? Make sure the fuel cap is tight. The easiest way to check the system is to have someone perform a smoke test. I had a DTC on my car which indicated a EVAP problem, it turned out to be the Fuel tank evaporator Control Solenoid.
257 views
Usually answered in minutes!
×