Question about 2006 Kia Sportage

1 Answer

How do i remove the rear wiper motor on 2006 kia sportage

Posted by bruce richard... on

Ad

1 Answer

keith lind jr

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 7 Answers

How do i replace the wiper switch on 06 kia sprtage

Posted on Apr 13, 2013

Ad

5 Related Answers

motor1258

Mike Butler

  • 6674 Answers

SOURCE: 2006 sportage timing belt- how to change

Here you go, just ignore part about removing sprockets. Click on pictures for larger view.

http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c152801bca65

Posted on Mar 01, 2009

Ad

Anonymous

  • 833 Answers

SOURCE: 2001 kia sportage blower motor resister

Rule of thumb...unless you get a better answer:  look for a couple of wires on a small plate that is in the airflow of the fan on the heater/ac unit.  The resistor pack is always air cooled by the fan.

Posted on Nov 11, 2008

Anonymous

  • 107 Answers

SOURCE: How do I dismantle and reinstall a front wiper

moz-screenshot-6.pngmoz-screenshot-7.pngplay0027.gif
Wiper Motor

Removal & Installation

  1. Disconnect the negative battery cable.
  2. Disconnect the wiper motor electrical connector.
  3. Remove the four mounting bolts securing the motor to the firewall.
  4. Using a suitable prybar, carefully separate the wiper motor from the wiper linkage and remove the motor.

To install:
  1. Attach the wiper motor ball joint to the wiper linkage.
  2. Position the motor on the firewall and secure the motor with the four mounting bolts. Tighten the mounting bolts to 75 ft. lbs. (102 Nm).
  3. Connect the electrical connector.
  4. Connect the negative battery cable.play0027_0.gif

moz-screenshot-8.png

Posted on Nov 25, 2010

lloyd cole

  • 250 Answers

SOURCE: 199 kia sportage heater blower motor stops then

a bad earth or chaffed wire

Posted on Aug 15, 2009

Anonymous

  • 2 Answers

SOURCE: 07 Kia Sportage 4x4 V6 Front windshield wipers stopped working.

o yeah take back to dealership where they will fix it for free

Posted on Aug 17, 2009

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

I have a 2006 kia sportage I have removed the rear wiper arm as not moving/.seized but the fuse is fine but fixing is not moving?please help

check for power at the wiper motor if you have power when the switch is activated if you have power there the motor needs to be replaced. if you have no power change the fuse and check again for power when the wiper switch it activated there is a relay that will cut out if the wiper is frozen to the window but unlikely that this will be your problem 9 times out of 10 the motor is gone.
0helpful
1answer

How do i replace the rear wiper blade on a 2007 Kia Sportage?

remove the small tin lock/wedge at the end of the wiper blade and pull it out of the frame
Thread the new blade back in and refit the lock
0helpful
2answers

I have a 2007 Kia sportage 4x4 v6. And my rear wiper isn't working. How do I test it before I buy a new motor?

If you look close to the wiper motor, you should find a 2 wire plug. Unplug it. Connect a 12 volt test light across the 2 wires.Turn on the rear wiper switch with the key on + if it lights up, you need a new motor. If it doesn't light up check your fuse and remove the one going to r.wiper. See it it's bad and replace as necessary. Garcuda
6helpful
2answers

How do I dismantle and reinstall a front wiper motor on a 2000 Kia Sportage?

moz-screenshot-6.pngmoz-screenshot-7.pngplay0027.gif
Wiper Motor

Removal & Installation
  1. Disconnect the negative battery cable.
  2. Disconnect the wiper motor electrical connector.
  3. Remove the four mounting bolts securing the motor to the firewall.
  4. Using a suitable prybar, carefully separate the wiper motor from the wiper linkage and remove the motor.

To install:
  1. Attach the wiper motor ball joint to the wiper linkage.
  2. Position the motor on the firewall and secure the motor with the four mounting bolts. Tighten the mounting bolts to 75 ft. lbs. (102 Nm).
  3. Connect the electrical connector.
  4. Connect the negative battery cable.play0027_0.gif

moz-screenshot-8.png
1helpful
1answer

On my Kia Sportage 'V' reg my windshield wipers stopped working. it isn't the fuse and you can hear the motor trying to work.How do I remove the wipers so that I can lift the plastic cowling between...

Some wiper arms are simply a push fit onto the drive shafts and some have a nut securing them on under a cover which has to be lifted up first. Try lifting up any plastic covers on the base of the arm at the windshield. If it looks like there is no cover then the arms are held on by the force of the springs and by a taper on the drive shafts and if you lift the arms off the windshield and gently rock them as you pull them away from the vehicle they will release..Just make sure that before you refit the arms that you run the wiper motor and allow it to self park as I have seen wiper arms remove paint when they have been dragged off the windscreen and over the paintwork and the wiper motor is easily powerful enough to cause real damage..
1helpful
1answer

My rear wiper has stopped working on kia sportage 2006. can hear switch ok and fuse ok, how do i remove trim to get to rear wiper motor

Test for power at motor.


Test for power at motor. If you have power, then replace.wiper motor. trim should be held on with panel clips that can be removed with a special panel removal pliers






if
0helpful
1answer

On my Kia Sportage 2006 my windshield wipers stopped working. it isn't the fuse and you can hear the motor trying to work.

you need to take off the plastic cowling at the back underneath the windscreen there you will see the mechanism for the wipers it will be obvious what is wrong with the linkages if the motor is okay.
0helpful
2answers

The winshield wipers stopped working on my 2006 kia sportage during a snow storm. how do i fix them

Did you check the fuse? (most likely culprit) Sometimes during heavy snow the motor gets overloaded gets hot and blows the fuse.
0helpful
1answer

07 Kia Sportage 4x4 V6 Front windshield wipers stopped working.

o yeah take back to dealership where they will fix it for free
Not finding what you are looking for?
2006 Kia Sportage Logo

Related Topics:

2,555 views

Ask a Question

Usually answered in minutes!

Top Kia Experts

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6929 Answers

Brad Brown

Level 3 Expert

18821 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14968 Answers

Are you a Kia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...