Cars & Trucks Logo

Related Topics:

Jeanette Posted on Apr 16, 2012
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Code p 1750 - Galant Mitsubishi Cars & Trucks

1 Answer

ZJ Limited

Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

  • Mitsubishi Master 17,989 Answers
  • Posted on Apr 16, 2012
ZJ Limited
Mitsubishi Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Joined: Jul 15, 2008
Answers
17989
Questions
0
Helped
14457360
Points
60858

DTC P1750: Mechanical Problem in Hydraulic Control System for A/T Clutch Pressure Control Solenoid Valves A and B, or Problem in Hydraulic Control SystemBelow is the Honda procedure to determine.Turn the ignition switch OFF.Replace the A/T clutch pressure control solenoid valves A and B.Reset the PCM memory by removing the BACK UP fuse in the passenger's under-dash fuse relay box for more than 10 seconds.Drive the vehicle for several minutes in 1st, 2nd, 3rd, and 4th gears in [D4] position.

Recheck for code P1750.

Hope helps.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
2answers

I have continental camper tyres on my motor home recommended pressure is higher than the tyre max 215/70r/15 cp100r. F/axle 1750 R/axle 1900 max what pressure do I use?

The best solution you'll get from books at www.reliable-store.com

These are books containing info on repair, service, troubleshooting, parts info, assemb ling dissemble, removal, error/fault codes, wiring diagrams and everything on any vehicles cars, atv, trucks. forklifts, boats, excavators etc
0helpful
1answer
0helpful
2answers

I have a 1998 audi a4. it will not start and gives me the p1749 and p1625 codes. how do i fix this?

code p 1625 refers to CAN databus, TCM--incorrect signal===causes --TCM trouble code/s stored---TCM incorrectly coded---wiring---matching resistor in ECM
I don't have a listing for code p 1749 but codes 1748 and 1750 are concerned with TCM defective and voltage supply low
so after you check the wiring and connections form the transmission you have 2 options
use a known good ECM to replace yours ( will eliminate any ECM faults)
and/or replace the TCM module on the transmission
0helpful
1answer

Between 1750/2000rpm car stutters and engine warning light sometimes comes on but usually goes off after engine is switched off and re-started.This happens intermittently and other than that the car r

you need to have the code pulled when the light comes on to find out what is causing it to come on and the engine running rough before the engine is turned off.
0helpful
1answer

2003 acura tl obd ii code 1740 and 1750

code 1740 refers to AT -4th clutch pressure switch===causes--wiring--range position switch---4th clutch pressure switch---ECM
code 1750 refers to AT-hydraulic system mechanical failure===causes--wiring --shift solenoids--ECM ---transmission mechanical fault.
4helpful
1answer

Alarm code # 1750 & 0705 in the scanner

OBD Code P1750 = Solenoid Assembly / Manufacturer Control Transmission.

I tell you it is infact your solenoid box assemble is going. What that does is to tell your transmission when to shift into gears. Im assuming your car is having a hard time shifting gears and juts need replace this part.


OBD Code P0705 = Transmission Range Sensor circuit (PRNDL - Input).

I'll check the Neutral Safety Switch. It's located on the shift shaft of the trans, and is a common problem. Also check the wiring leading to the switch, as it is exposed to road grime and has been known to corrode and melt.

Also can review this DTC P0705.

Hope helps.
1helpful
1answer

When I start the truck, it may rev to 1750 rpm, drop to 1250 rpm. The when I put it into reverse, it clanks. Then when I put it into drive, the car move forward at about 3-5 mph and you can rev the engine...

check the throttle position sensor, and the IAC they may need adjusted or cleaned, or replaced. they can be bad and not send a code to the ECM


Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/sean_54c3a3dc48a7773c

0helpful
1answer

Catalytic Converter for Honda CRV 2002- cost/necessity of repair

run scanner for trouble codes, some auto parts stores will do this for free
Not finding what you are looking for?

1,006 views

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...