Question about 1993 Jaguar XJ6
Posted by Anonymous on
no there is'nt enough pressure underneath to make it leak try tighting up the valve cover bolts or just getting a new gasket about a $6.00 to $10.00 dollar fix depending on where you go
Posted on Dec 02, 2008
The fuel filter is an inline type, and is located up under the Driverside rear wheel arch. If you get underneath and look up and behind the rear coil spring you will see it. just follow the fuel lines from the tank. It's a bit tight and you will get covered in fuel but it's doable.
Fram's number is G3727, which is the same used on my '04 Chevy Suburban. You'll need to release the fuel pressure by unscrewing the gas cap first. Also, you'll need some wrenches to hold fast both at the filter and line ends, plus some rags and a coffee can to catch/absorb the fuel that will spill out of both the filter and the line; you'll loose about 1/2 a cup. Good luck.
Posted on Aug 15, 2009
SOURCE: need know how to change
Here is a very good tutorial for that
- only the upper body is different, the rest is identical; and here is a new pump
Posted on Oct 19, 2010
Tips for a great answer:
Apr 26, 2018 | Jaguar Cars & Trucks
Dec 12, 2013 | 2001 Jaguar Vanden Plas
Nov 18, 2012 | 1996 Jaguar Vanden Plas
May 30, 2011 | 2002 Jaguar Vanden Plas
Oct 27, 2009 | 1989 Jaguar Vanden Plas
Sep 30, 2009 | 1989 Jaguar Vanden Plas
Sep 01, 2009 | 1990 Jaguar Vanden Plas
Dec 02, 2008 | 2003 Jaguar Vanden Plas
Dec 01, 2008 | 2000 Jaguar Vanden Plas
34 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: