Question about 2001 Chevrolet Tracker
My driver seat belt does not allow me to pull it out?
Posted by Anonymous on
Unfortunately the seat belt must be replaced the mechanism that control it is stuck and cannot be release.
Posted on Apr 30, 2015
as long as nothing is stuck in track and you hear no noise when using switches, look for broken wire at connector or in harness. ck fuse first of course, if blown, something may be stuck in track causing it to stop and blowing fuse
Posted on Nov 16, 2008
SOURCE: Seat belt stuck
Open small plastic access panel located between front and rear doors a few inches above floor. Disconnect the two wire connector (usually attached to car frame) and locate the male pin connector, usually 1 red and 1 blue wires. Run two long wires from a car battery negative post and positive post (battery on the car or separate.) Hold one wire against one pin of the connector and quickly touch the other wire against the remaining pin. This will cause the motor to turn in one direction. If motor turns in wrong direction simply reverse the wires until motor brings belt to desired position then quickly remove the wires. Reattach connectors to resume 'normal' operation after 'CAUSE' has been repaired.
Posted on Aug 27, 2009
Tips for a great answer:
Jun 15, 2016 | Cars & Trucks
Aug 23, 2015 | AC Cars & Trucks
Apr 10, 2015 | 2004 Chevrolet Tracker
Apr 21, 2014 | 2002 Chevrolet Tracker
Oct 31, 2010 | 2001 Chevrolet Tracker
Mar 28, 2010 | 2001 Chevrolet Tracker
Nov 18, 2009 | 1998 Chevrolet Cavalier
Aug 27, 2009 | 1992 Ford Thunderbird
Nov 15, 2008 | 2001 Chevrolet Tahoe
903 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: