SOURCE: I have a 1978 chevy
On the back right side of the tranny you will find the modulator valve with a vaccum line. First check the the line is ok, if so, replace the valve. Note; there is an adjusting screw inside the vaccum hose fitting to change the shift modes. Don't mess with it unless necessary! Frankster016
Posted on Dec 02, 2008
SOURCE: 1988 Chevy truck
no try looking at the governer on the back should be a cover about 4 in arond remove and look to see if the plastic teeth are broken or worn.
Posted on Mar 17, 2009
SOURCE: 1997 Chevy 1500 P/U 4x4 small V8. Transmission shifting issue.
you may be confusing the torque converter clutch engagement with o.d. this trans has a problem with the T.C.C. regulator valve wearing out the valve body bore. this will cause the converter clutch to engage only sometimes or not at all. this will set a P1870 code in the control module. when this code is stored in the controller, ( check engine light may or may not be on), it increases the pressure in the transmission causing the 1-2 shift to be harsh. ask a local tranny shop to scan the vehicle ( most will do this for free) if this is the problem they can either fix your valve body (sonnax parts) or replace it with an upgraded valve body. hope this helps
Posted on Dec 16, 2009
SOURCE: 1995 Chevy S10. The transmission (4L60E) has been
Imput drum is built incorrectly or bad imput drum. trans assembled correctly, put on trans x and if trans does not operate correctly I will ship you one for $1000 www.TransmissionGarage.com
Posted on Dec 30, 2009
Jun 03, 2018 | Cars & Trucks
Jul 17, 2015 | Cars & Trucks
Dec 27, 2012 | 1993 Jeep Grand Cherokee
Apr 20, 2011 | Chevrolet Tahoe Cars & Trucks
Jan 04, 2010 | 1997 Chevrolet Suburban
Nov 03, 2009 | 2002 Mitsubishi Eclipse Spyder
Sep 07, 2009 | 1983 GMC C1500
Jan 14, 2021 | 1985 Chevrolet El Camino
114 people viewed this question
Usually answered in minutes!
×