WHERE IS THE IPR LOCATED ON THE ENGINE ?

Question 1

0helpful

1answer

Have an f550;lights are still on and I have power but won't start

Diesel? Check the IPR pressure with a scanner. 500 to 800 PSI to start this beast. I don't remember if it is 500 or 800. Anything under, replace the IPR sensor.

Dec 06, 2015 • Cars & Trucks

1helpful

1answer

Http://youtu.be/T1hf7bPjCEk It won't start in the mornings but starts the rest of the day just fine once started. I don't know how to explain it, please watch the video.

Just did a 2010. 6.0 diesel. Inter cooler problems, ran bad, but ran. Fixed it and had a no start. Keyed it several times and started, started the rest of the day, So we shipped it out to the customer. Came back with no start. Through the scanner on it and no codes. But we weren't getting the oil pressure to start the engine. (takes 500 psi) Cycled the IPR solenoid a dozen times and finally got pressure and started. Replaced it and it hasn't been back. I have worked on plenty of 7.3's and always looked at the IPR solenoid first for no starts. Even told the boss to check the IPR when it came back. He told me 6.0 were different beasts. IPR solenoids aren't cheap, I would put it on a scanner to make sure.

Apr 07, 2015 • Cars & Trucks

0helpful

2answers

I have a 2003 ford f350 fule pump has ben replaced but still not getting no fule

Is this a diesel or gas vehicle ? and what engine does it have ? They all have different type of systems . Diesels have a low pressure and high pressure pump and IPC and IPR valves . Gas vehicles have different controls ,( FPDM ) fuel pump driver module that is controlled by the engine computer ,with the help of a fuel rail pressure sensor. There is problem with the FPDM because of it's location under the vehicle . How To Fix the P1233 FPDM No Start Condition DTC Ford Truck Technical... 06 Ford Powerstroke diesel no start low injection pressure icp ipr

Dec 30, 2014 • Ford Cars & Trucks

0helpful

1answer

08" Ford F-350 diesel no start.

6 0 Powerstroke no start IPR valve tips and tricks P2291 P2290

Watch this guy's videos , send him a message ! for ford diesels he's good !

Dec 06, 2014 • Ford Cars & Trucks

0helpful

1answer

Price to install IpR Valve 6.0 diesel

Check with your local Ford dealer at the service dept, then contact a few other local diesel mechanics to compare Ford's estimate.

Aug 07, 2013 • 2006 Ford F 350 Super Duty

0helpful

1answer

F350 super duty, after running for an hour wont restart for a couple hours runs fine once you getted started

sounds like ipr valve
located under turbo 2 wire 1 conectorwire clip on
1 3/8 wrench to removed after turbo and air system been pulled off
get your new valve at your local international dealer
ask for ipr valve for vt365 engine bet you it's half price and same part
make sure that screen at end of valve came out with valve use small pick hook to remove if not
good luck

Feb 28, 2011 • 2006 Ford F 350 Super Duty

0helpful

1answer

Where is the IPR located on a 2001 f250 super duty 7.3

the IPR is located in rear, top, center of the engine in the High pressure oil pump. It can be identified by its gold color. It sticks out of the side of the pump pointing toward the driver side of the truck. It has a 2 wire plug that is held on by a metal clip.

Jan 23, 2011 • 2008 Ford F-250 Super Duty

0helpful

1answer

7.3 diesel runs for about ten minutes and shut off...wait 15 - 20 minutes and it restarts and does it again?????

this problem is most lickly do to a ipr regulator failling when hot
it is located on the hi pressure pump when this problem occured
try to cool it of with cold water (garden hose) if it restarts keep
hose on it to see if it runs longer if so replace ipr

Sep 28, 2010 • 2004 Ford F350

0helpful

1answer

2007 F350 diesel 6.0L power stroke was running fine but stopped at rest area and engine would no start up again. will crank but not turn over

could be a bad icp sensor or a bad ipr valve

Sep 17, 2010 • 2007 Ford E-350 Super Duty Length XLT

1helpful

2answers

Luis

Check the fuel delivery system. Everything on a 6.0 is dependent on the high-pressure oil system to actuate the injectors. If there is a fault in the system, the ECM will not allow the motor to start or run. CHANGE OIL RELIGOUSLY! I'd start with verifying the IPR and IPC are operating correctly. Depending on the year, these are located in different locations. In my 03' they are located under the heat shield below the turbo at the rear of the motor. Need a cool motor to inspect cause you've got to lay on it to access from the top.

Aug 05, 2008 • 2007 Ford F-250 Super Duty Lariat

Question 2

Anonymous

Contributor 18 Answers
Posted on Nov 16, 2008

Anonymous

Contributor

Joined: Sep 07, 2008

Answers

18

Questions

1

Helped

12508

Points

43

The "IPR" is and Injector Pressure Regulator. It is a Solenoid used to control the oil pressure created by the High Pressure Oil Pump. The IPR is capable of regulating oil pressure from 0 to 5000 psi. On an 05 6.0l the IPR is located in rear, top, center of the engine in the High pressure oil pump. It can be identified by its gold color. It sticks out of the side of the pump pointing toward the driver side of the truck. It has a 2 wire plug that is held on by a metal clip. usually the ipr and plug are protected in a heat shield so you may not be able to see it right away. Some people mistake and IPR for and ICP. The ICP is a sensor that tells the PCM what the High oil pressure is. ICP stands for Injector Control Pressure. This sensor is located in the passenger side valve cover on and 04, 05 6.0l and in the top of the High pressure oil pump on an 03 6.0l.

Anonymous Nov 16, 2008

In my solution i only mention up to and 05 6.0l... sorry... all the information is also true for an 06. Good Luck
John Green Feb 26, 2013

the IPR will be found on the back side of the HPOP

×

Answer 2

Anonymous

Contributor 1 Answer
Posted on Sep 13, 2010

Anonymous

Contributor

Joined: Sep 13, 2010

Answers

1

Questions

1

Helped

1973

Points

3

Where is the high pressure oil pump located in 06 f250 super duty

Related Topics:

WHERE IS THE IPR LOCATED ON THE ENGINE ?

2 Answers

Anonymous

Anonymous

Add Your Answer

Attachments: Added items

Related Questions:

Have an f550;lights are still on and I have power but won't start

Http://youtu.be/T1hf7bPjCEk It won't start in the mornings but starts the rest of the day just fine once started. I don't know how to explain it, please watch the video.

I have a 2003 ford f350 fule pump has ben replaced but still not getting no fule

08" Ford F-350 diesel no start.

Price to install IpR Valve 6.0 diesel

F350 super duty, after running for an hour wont restart for a couple hours runs fine once you getted started

Where is the IPR located on a 2001 f250 super duty 7.3

7.3 diesel runs for about ten minutes and shut off...wait 15 - 20 minutes and it restarts and does it again?????

2007 F350 diesel 6.0L power stroke was running fine but stopped at rest area and engine would no start up again. will crank but not turn over

Luis

Not finding what you are looking for?

2006 F-250 Super Duty

Have an f550;lights are still on and I have power but won't start

Ask a Question

Check Out the Latest Top Trucks Report!

Top Ford Experts

ZJ Limited

Thomas Perkins

xxxxxx xxx

Are you a Ford Expert? Answer questions, earn points and help others

Manuals & User Guides

Related Topics:

WHERE IS THE IPR LOCATED ON THE ENGINE ?

2 Answers

Anonymous

Anonymous

Add Your Answer

Attachments: Added items

Related Questions:

Have an f550;lights are still on and I have power but won't start

Http://youtu.be/T1hf7bPjCEk It won't start in the mornings but starts the rest of the day just fine once started. I don't know how to explain it, please watch the video.

I have a 2003 ford f350 fule pump has ben replaced but still not getting no fule

08" Ford F-350 diesel no start.

Price to install IpR Valve 6.0 diesel

F350 super duty, after running for an hour wont restart for a couple hours runs fine once you getted started

Where is the IPR located on a 2001 f250 super duty 7.3

7.3 diesel runs for about ten minutes and shut off...wait 15 - 20 minutes and it restarts and does it again?????

2007 F350 diesel 6.0L power stroke was running fine but stopped at rest area and engine would no start up again. will crank but not turn over

Luis

Not finding what you are looking for?

2006 F-250 Super Duty

Have an f550;lights are still on and I have power but won't start

Related Topics

Ask a Question

Popular Questions

Fuse box diagram

I need a fuse panel

Fuel relay on a 2002 f250 super duty, no manual

F-250 extended cab rear door will not open.

Where is the turn signal flasher relay located on

Check Out the Latest Top Trucks Report!

Top Ford Experts

ZJ Limited

Thomas Perkins

xxxxxx xxx

Are you a Ford Expert? Answer questions, earn points and help others

Manuals & User Guides