How do you reset the clock in a 2005 ml350 - 2007 Mercedes-Benz ML350

not normally most mercs have a chain timing belt so dont need doing its only need replacing if its worn which in most cases you can here a rattle from the engine dont let any one tell you they need changing every so many thousand miles as this is rubbish mine has 176000 miles and still has originall chain hope this helps

MANY are connected to the drivers door lock, using the key , turn it to the left pause turn it to the right pause... do this twice...

If the transmission is slipping and I assume that is what you mean then it is going to need an overhaul. Once an auto transmission slips it is done.

You need to have someone with a scanner reset it. Any good parts store can do it for you for FREE

automaticly after you fix the problem.

Press services ,left of screen,then system,right ofscreen
Use up/down/left/right on rotary button bottom right/screen

Switch ignition on and immediately press the button to the bottom left of the speedo (trip reset type button) TWICE !!
Switch Ignition off
Press and hold same button while switching ignition on.
After 10 seconds a new interval will display followed by a beep.
Release the button and switch ignition off.
All done.

this needs to be done by a mercedes dealership/garage

Hi, The rear and the front washers both use the same resevior. I think the fluid level sensor is at fault.