Question about 1998 Oldsmobile Regency
Posted by Anonymous on
you need to go buy a Chilton. There is a litle more to it than telling you a couple of things on a web page. Also if your car has a 4 cylinder and you are replacing the water pump, something they don't tell you is you have to replace the timming belt also. If you don't you will be replacing them both again in a couple of months.
Posted on May 03, 2009
Remove the belt, Remove the 2 bolts that hold the pump to the engine by using a socket and extension through the hole in the pump pulley. Remaove the 2 hoses. you may have to pull the pump out through the wheel well.
Posted on Aug 16, 2009
4.5 quarts of oil including the filter. that is assuming you have the 3.8 lliter v6 engine.which is standard. you can put about 1/4 quart of oil in the filter and then screw it on the oil filter housing. this will help eliminate a dry start condition when you crank the engine over after changing the oil and filter. put the remaining 4 quarts in, run the engine for 30 seconds and then check the oil level to top it off.
Posted on Oct 24, 2009
the filter is in the filter box next to the battery eather unscrew the screws if it has them or pop the clips it will open replace the filter
Posted on Mar 04, 2010
Tips for a great answer:
Oct 20, 2014 | 1998 Oldsmobile Regency
Mar 18, 2013 | 1998 Oldsmobile Regency
Jun 16, 2012 | 1998 Oldsmobile Regency
Jun 15, 2012 | 1998 Oldsmobile Regency
Mar 03, 2012 | 1998 Oldsmobile Regency
Mar 04, 2010 | 1998 Oldsmobile Regency
Sep 23, 2009 | 1998 Oldsmobile Regency
May 13, 2017 | 1998 Oldsmobile Regency
32 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: