Where is in mazda 6 2009 located inertia

there isn't one, only Fords have inertia switches.

I'm trying to find the inertia switch on a 2004 Mazda 6s 6

JustAnswer https://www.justanswer.com > Mazda Repair
Aug 14, 2016 - There is no inertia switch on your mazda 6. There is a fuel shut off valve which is integrates in the fuel tank. When you put the key to run ...

1 answer · Top answer: Just checking to see if you need any further assistance. If you do just let me know. If you ...

RESETTING THE SWITCH

mazdabg.com https://www.mazdabg.com > ftp-uploads > Mazda > 9...
RESETTING THE SWITCH. Turn the ignition switch OFF. Ensure that there is no fuel leaking in the engine compartment, along any of the lines or at the tank.

https://www.mazdabg.com/ftp-uploads/Mazda/--Repair%20Instructions--/Mazda%20MPV%20Pickup%20Navajo/9097CH05_RESETTING_THE_SWITCH.htm

didnt know 1998 had an inertia reset switch

has a fuel pump relay

cant be sure but looks like the tank has to come out to fit a petrol pump

Only Ford products use an inertia switch for the fuel pump.
Mazda only uses a relay controlled by the engine computer.

You Mazda does not have an inertia switch like the fords do. The only things that control the fuel pump are the pcm, fuel pump relay, and the fuel pump fuse.

No inertia switch. That was a common problem on these cars., The alarm box gave problems and it is what is causing the fuel pump to shut off. Good luck finding one. The easiest and cheapest way to fix is to give it ignition power when you turn ignition on. If you want to be a bit safer, buy a ford KA inertia switch, secure it at the l/f kick panel directly onto the body (It works with shock waves) to cut of fuel in case of an accident Luckily you don't have to take the tank out, you just remove the rear seat and the metallic cover. .

If it has an inertia switch, it will be on the passenger side under the kick panel under the glove box.

I only show a pump relay for 95-99 model cars. No inertia switch.

I put in for information on a Mazda 6 with a 3.0 2004 ain't not one of them they're going to answer y'all got up there anywhere near no Mazda 6 3.0 2004 what kind of is that where is the nursery switch

Unless you own a mid 90's Mazda truck, you won't have one. Ford vehicles were really the only ones to use the inertia switch. If it is a mid 90's Mazda truck, it's up under the passenger footwell, either behind the kick panel or under the dash.