Question about 1998 Dodge Ram 1500 4WD
Well, it's definitely on the intake manifold somewhere. On a Chrysler 2.5L v-6, the IAT is on the upper intake manifold, at the front of the engine (the farthest point from where air enters the intake). This is a transverse engine, but your IAT should be on the intake or plenum.
Posted on Mar 05, 2012
SOURCE: iat sensor
Hi there ... The IAT sensor is on the intake manifold, just behind the alternator. For further info on this sensor you can go to www.autozone.com. click on repair info,select your vehicle. then click on vehicle repair guides. In the product search box at the top left type in IAT and then click on the repair guide in the box that appears and it will give you more info.
Hope this helps you out
Posted on Jan 23, 2009
You can find the intake air temp sensor on those engines at the right front of the intake manifold just behind the alternator. It goes into the manifold at an angle and should be in plain sight.
Posted on Apr 17, 2009
ABS LIGHT ON AS WELL?IF SO..I WOULD LOOK AT ABS SENSOR IN REAR DIFFERENTIAL..GETS SPEED SIGNAL FROM THIS SENSOR AS WELL..USES ONE IN TRANS FOR TRANS SHIFTING
Posted on Aug 31, 2009
Tips for a great answer:
Jan 27, 2011 | 2004 Dodge Ram 1500
Jan 01, 2011 | 2006 Dodge Ram 1500
Jan 23, 2010 | 2008 Dodge Ram 1500 2WD
Sep 10, 2009 | 2004 Dodge Ram 1500
Aug 28, 2009 | 1998 Dodge Ram 1500 4WD
Jun 11, 2009 | 1998 Dodge Ram 1500 4WD
Mar 28, 2009 | 2001 Dodge Ram 1500 Truck 2WD
Jan 23, 2009 | 2004 Dodge Ram 1500
301 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: