Left tail light @ blinker out

Download the owner's manual from Ford.

Ford Explorer Questions - HELP! Mayday! Mayday! Damsel ...

www.cargurus.com > Questions > Ford > Explorer

CarGurusJun 13, 2014 - Tail lights and dash lights went out simultaneously on Ford Explorer2000. Brake lights still work ... LIGHTS ARE NOT WORKING. Is this a fluke?

my tail lights wont work, and im out of ideas. i need help! - Ford ...

www.explorerforum.com > ... > 2001-2005 Explorer Sport Trac

Sep 15, 2011 - 18 posts - ‎7 authors
-no luck, the tail lights still wont work, and the ABS is light is still on. .... only lights in my entire truck that are not working are my tail lights. i had ... left rear tail light not working - Ford Explorer and ...
7 posts
Jan 3, 2012
HELP! Headlights, Tail lights dash lights not working
4 posts
Jan 21, 2011
Dash Lights Not Working... fuse or switch? - Ford ...
19 posts
Aug 22, 2008
Rear Tail lights / Dashboard do not work. - Ford ...
12 posts
Jan 22, 2007
More results from www.explorerforum.com

You may have a "CROOK" earth

I would recommend taking out the tail light. Get a test light, have an assantant step on brake. U will see the bulb in tailamp light up. Probe the wire w/your test lamp. That is brake wire. Repeat that process for blinker.. Drop down those two wires. Hook that to the same side on trailor. Repeat for left and you should be all set.

Probably the blinker switch ..The brake light circuit runs through the blinker switch..Let somebody look and while you have the brakes applied move the switch around and see if the lights come on

check brake light switch on brake pedal arm. Does high mount stop lamp work?

I had the same problem with my 2002 Explorer Sport. It ended up being a loose wire.

did you try to replace the bulb in the back normally when it blinks fast like that its just the bulb and its doulbe film thats why the brake and blinker dont work

Just found the answer on another site. Sure enough went out removed the 3 philips head screws in the steering column opened it up and walla a wire connection had pulled itself free. When my son uses my truck he always uses the tilt steering, when I get in I have to readjust it. because of this the wire connection pulled itself out. I simply pushed it back in an blinker and brake light are now working. My husband is now trying to figure a way to secure the wire connection so it doesn't pull itself out again. Hope this helps others, either by saving the cost of a dealership or machanic or from getting rear ended.