- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
https://www.mercedesmedic.com > fuse-box-location-d...
Fuse locations on Mercedes-Benz M-Class W164 2006-2011. Main fuse box and relay box is located in the engine compartment. Rear, passenger side in the trunk.
Model: ML 320 CDI ML 320 BLUETEC ML 350 ...
Years: 2006 2007 2008 2009 2010 2011
Chassis: 164
https://www.mercedesmedic.com > fuse-box-location-d...
Fuse locations on Mercedes-Benz M-Class W164 2006-2011. Main fuse box and relay box is located in the engine compartment. Rear, passenger side in the trunk.
Model: ML 320 CDI ML 320 BLUETEC ML 350 ...
Years: 2006 2007 2008 2009 2010 2011
Chassis: 164
Make: Mercedes-Benz
With a lot of cursing, usually. Remove the rear cover from the headlamp assembly. Grab the socket attached to the bulb and turn counter clockwise about 1/8 of a turn. The bulb will then come out with the socket and can be replaced. Install in reverse order (remember the orientation of the bulb and socket and they will only go in one way).
Not sure if you need to replace the entire lens assembly or just a hid bulb. The Assembly is easy to remove with only 3 10mm bolts. The bulbs are all accessible from the back but the drivers side is a bit snug if you have larger hands. Most guys pull the assembly to give easy access to everything. Any of this is definitely a DIY that should take under 20 minutes both sides. If you need to replace bulbs buy a pair and replace both sides not just one. When you update this with what needs to be done then we can get your proper instructions
well this is not easy unless you make a accessby removing anything in the way,or just take the headlight out ,How did you manage to open the bonnet as these vehicles from around this year started using a sealed bonnet that only the dealers can open with a special electronic key that uses rolling encrypted software.
×