Nissan tino abs fault - 2001 Nissan Almera Tino

SOURCE: Nissan Almera Tino Right hand side

YEs but if you are going to do some secrifice on your luck of car model from front,

otherwise its impossible,

you can get this from older car dealer or service center,

TNX

SOURCE: ABS FAULT WITH NISSAN TERRANO YREG

Had same fault - was damaged wiring in loom at back of engine where main engine harness meets the bulkhead.

There is a screened cable grey/pink that houses the two O/S/F ABS wires blue and pink. The loom copex cuts through the ABS cable causing this fault. Take a look at link below:

http://www.bba-reman.com/forums/Topic79424-1-1.aspx

SOURCE: how do i get service

Hi there.I think i can help u to turn off service alert, Its done in the following way:-
1.Switch ignition on ( do not start engine )
2.Switch radio ON.
3.Start engine.
4.Switch radio OFF.
5.Press and hold INFO button.
6.Turn volume control knob at least 30 clicks until self dianostic menu is displayed and an audible
signal is heard. ( while still holding the INFO button )
8.Using the circular dial ( Joystick ) select Confirmation/Adjustment and press centre of joystick
to ENTER.
9.Select Service and press ENTER.
10.Select Reset and press ENTER
11Press BACK button to return to main menu.
12.Switch OFF ignition
This should do the job, sorry it`s so long winded
Good luck John ( South Wales UK)