Car dies while driving

Error Code: P0335
Description:
Crankshaft Position (CKP) Sensor - Circuit Malfunction
Possible Cause:
Wiring.
Crankshaft position (CKP) sensor.
Engine control module (ECM).

Let's start with the codes.

Po129 refers to barosensor

Po344 is a code for the camshaft position sensor

Po339 crankshaft position sensor

Po340 camshaft position circuit malfunction

Po335 crankshaft POS sensor malfunction

Po122 throttle pedal position

Item 2,3,4,5 relate to each other that s camshaft and crankshaft position sensors. Since both already show a malfunction code, it would be advisable to change.

Sometimes other codes show up because there is a relation but not that the item is bad.

That is a crankshaft position sensor malfunction. Replace your crankshaft position sensor. Your car may be running rough and in some cars a failed CPK sensor will not allow the car to start.

CODE PO335 CRANKSHAFT POSITION SENSOR CIRCUIT. CODE PO315 - NO CRANKSHAFT POSITION SENSOR LEARNED. POSSIBLE CAUSES, CRANKSHAFT TONE WHEEL FLEX PLATE IS DAMAGED, TONE WHEEL PULSE RING MAY BE DAMAGED, ERRATIC CKP SENSOR SIGNALS WIRING CONNECTOR PROBLEM, CKP SENSOR HAS FAILED, PCM HAS FAILED.

Thanks for choosing FixYa and welcome to the site. If that is the code your computer gave you, change the crank sensor. It can eventually cause your vehicle to quit running if it goes bad.

im pretty sure if you have someone check the engine computer for fault codes youll find either a po335,po725 or po340.these relate to failures with your crankshaft and camshaft position sensors.relatively inexpensive fix at the outset 250.00 to replace both.i would recommend replacing both as they are identical sensors and acommon source of trouble on these models.

test it with a multimeter first but yes it could cure it ,i mean its 20 yrs old and in the running for a collectable classic vehicle

CODE POO73- OUT SIDE AIR TEMPERATURE SENSOR CODE PO339- CRANKSHAFT POSITION SENSOR CIRCUIT INTERMITTENT. CODE PO335 -CRANKSHAFT POSITION SENSOR CIRCUIT MALFUNCTION.

PO725 = Engine Speed Input Circuit
PO335= Crankshaft Position Sensor A Circuit

po843 is a hydraulic pressure valve in the transmission,that will have to be replaced.The code po335 is crankshaft position sensor a circuit malfunction.The sensor could be at fault here.