At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
1996 jeep grand cherokee - overhead computer read out
Our computer read out, compass, DTE, outside temp, etc.. does not work. I have checked the fuses all good. I can cycle thorough all of the read outs, but no data. Any help? Thanks.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hi..my name is Keith..and it sounds like to me that your ignition switch has went bad..i would check that 1st..i hope this has helped..if not please write me back
the 1st thing u do is have the system tested for trouble codes that will explain this no start, most common cause is ignition loss of spark, but check the codes.
Check to make sure that you aren't changing between km/mph readings. I had the same problem when it was 90 degrees out side and the temp was registering in the thirties. It's the button on the left, should say something about KM/IMP or something...
×