How to replace a valve cover gasket on a 94 dodge grand caravan

SOURCE: 89 Dodge Raider 3.0 Labor hours to replace Valve cover Gaskets and seals

.5 for the 4 cyl. and its 3.6 for the 6 cyl. engine. This is according to the Chilton Labor Guide.

SOURCE: repair rear valve cover gasket on 2001Dodge Caravan 3.3

the only way to replace the rear valve cover is to remove the upper intake....there is no easy way

SOURCE: replace valve cover gasket

I have the same problem on a 2003 Town & Country. The cover for the front 3 cylinders is quite straight forward, but in order to do the rear cylinders I believe you are going to have to remove the cowling below the windshield. You will need a gear puller to remover the windshield wipers first, then remove the cowling. Than should give you more room to work. It's still not going to be easy, but it sure beats paying hundreds of $$$$ in labor charges.

SOURCE: Replacing valve cover gaskets on 1995 Dodge Caravan

id put a little sealer on just to hold it in place i change mine and its been a year no leak

SOURCE: I need to know what the valve cover torque specs

Hi!!

My book says 89 in-lbs.

good luck