2007 Chrysler Pacifica

are you DIY, doing or did this work or others?
your hands? if did, see the HID bulb below?
head light , right side, dead (USA right side) ?
in UK passenger is LEFT side. so please say left /right

• low beam
• high beam
• and high beam flaster switch

OR all 3 dead. selections dead.
and all other electric things work and car drives ok.
yes the 2 orange are parking lamps. all sides/corners and ends of car good parking lamps.

off hand using the wrong bulbs not reading the free users guide in the glove box for bulb number
USA answers only (me)
Chrysler maker
this car uses the BCM body brain to run front lamps
and does so using 4 outputs. 2 low and 2 high each side.

some of these cars have HID lamp options.
and are totally unique, for head lamps! IF TRUE.

standard bulbs are H3 TYPE. AND ARE NOT HID.
PAGE 406 IN THE USER GUIDE
HID BULBS ARE HIGH VOLTAGE LAMPS.
DO NOT PLAY WITH THOSE, OR GET SHOCKED
AND REQUIRE SPECIAL PARTS TO REPAIR IT.
Same page
On vehicles equipped with High Intensity Dis-
charge Headlights (HID), when the headlights are turned
on there is a blue hue to the lights. This diminishes and
becomes more white after approximately 10 seconds, as
the system charges.

the lost free manual is here by maker

https://vehicleinfo.mopar.com/assets/publications/en-us/Chrysler/2007/Pacifica/1577.pdf

and more
Do not touch the glass of High Intensity Discharge (HID) or halogen bulbs with fingers or other possibly oily surface. Reduced lamp life will result.

HID install 1 step says
Place the igniter on the HID lamp. Do not at this time connect the igniter electrical connector. It will make it unable to twist the igniter to the closed position.

the igniter can be bad.
HID uses D2S bulbs only .
Chrylser p/n
MOPAR 4865941AB
and looks like this.

VERY EXPENSIVE TOO. PARTS.


PARTS PAGE

https://www.rockauto.com/en/catalog/chrysler,2007,pacifica,4.0l+v6,1433518,electrical-bulb+&+socket,headlamp+bulb,11701

The piece that is on the glass is glued on with an ultra violet cured adhesive, or a two part epoxy adhesive. The last one I did was cured by the sun in 24 hours (mix, set and cure).

https://www.youtube.com/watch?v=8IBp0Pkoa24

Gluing it back on

https://www.google.com/search?q=fixing+rear+view+mirror+mounting+plate

Permatex® Rear-view Mirror Repair Kit - Canadian Tire

https://www.canadiantire.ca > ... > Interior Car Mirrors
Jan 23, 2022 - Permatex® Rear-view Mirror Repair Kit contains everything required for making professional quality repairs in just minutes Two part adhesive ...
Mount Style: Adhesive
Assembled Weight (kg): 1.00 kg
Assembled Weight (lb): 2.20 lb
Assembled Width (mm): 10.00 mm Rating: 3.3 · ‎$6.49

How to Fix a Rearview Mirror - NAPA Know How Blog

https://knowhow.napaonline.com > how-to-fix-a-rearvi...
Jul 30, 2020 - Most rearview mirror repair kits only come with the glue components, some come with a replacement metal glue-on tab, but you still need a couple ...

Permatex® Rearview Mirror Adhesive Kit

https://www.permatex.com > products > permatex-rearv...
Permatex's Rearview Mirror Adhesive contains everything required for making professional quality repairs in just minutes. This repair kit includes ...

Rearview Mirror Repair Kit - Princess Auto

https://www.princessauto.com > product
Home · Auto Repair · Chemicals, Adhesives and Lubricants · Adhesives and Sealants · Instant Adhesives; Rearview Mirror Repair Kit.

Could be the BCM, have the dealer scan it for faults.

2007 Chrysler Pacifica Problems, Defects & Complaints

www.carcomplaints.com/Chrysler/Pacifica/2007/
5 days ago - The 2007 Chrysler Pacifica has 97 problems & defects reported by Pacifica owners. The worst complaints are engine, transmission, and ...‎Engine - ‎TSBs 13 - ‎Crash Tests 2 - ‎Defect Investigations 2

Once you pop off the plastic cover on the mirror (that matches your car color) everything is accessible.

Hello, yes the glass can be replaced. you will need to see your local GM dealer for the glass. real simple to replace.

Carefully push the outside rearview mirror face on the inner edge, near the front door window glass, to allow access.

Insert a large flat-bladed screwdriver in the slot between mirror lens and the mounting base.

Grasp the mirror face firmly and pull it from the mirror body.

Remove the outside rearview mirror case from the outside rearview mirror housing and disconnect the heater wire, if equipped.

Using the palm of your gloved hand, press firmly on the center of the glass until the case seats onto the motor.

The mirror will make a snapping noise when properly seated.

Inspect the mirror for proper operation.

not too hard, behind the mirror on the inside there should be a triangular plastic cover, this will unclip with a little bit of levering with a screwdriver or flat blade.
once removed you should see a few holes in the door frame, in a few of those holes you will see at least 3 bolt heads, undo the bolts making sure you dont drop them inside the door cavity, there will also be a multi wire electric plug that you will have to seperate, the outside mirror can now be removed.
Dont try just replacing the glass as it involves almost destroying the whole mirror assembly, replace the complete mirror assembly

auto dims the glass for the headlights at nighttime so the people behind you dont blind you.

With care

hi from uk answer is yes the mirror glass can be bought on its own at least here in the uk HALFORDS do a selection of these for various models also a mirror glass that simply sticks to the cracked glass full surface by a backing of double sided glued cushion pad so assume your location will have these at motor supermart ? if not then you can do as i have done in past ? make a card template of mirror then cut or have cut ? your own mirror then double sided tape will do the same job?