I had an intake manifold leak on my 99 crown victoria, after replacing the intake manifold there were spilled antifreeze around the engine. i then reinse the engine off with a water hose. The very next day after driving 12miles my digital dash board and headlights completely went out. What couldve happened please help.
SOURCE: intake manifold installing..... difficult?
i replace the intake manifold on my 98 crown vic . its was easy just take your time take pictures. the hardest part for me was two bolts in back of the heads facing the firewall once you get those it quite easy after that. plus you save your self a least 500.00 dollars. good luck
SOURCE: My 99 Crown Vic acts like it isn't getting gas
check for clogged fuel filter first, usually the pump works or it dosen't, check and get back to me.
SOURCE: 99 crown vic police interceptor steering wheel??
i have ran into 2 issues in these vehicles---if it binds while sitting still also, check the steering shaft, i have found the u-joints in the shaft tighten up and binds dangerously tight---if they are free, sounds like you may have a steering box issue or restriction in a line---hope this was helpful!!
111 views
Usually answered in minutes!
×