Limp mode
Limp mode can be reset as eaily as shutting off the car and restarting it. the computer will then retest the system, if the problem is gone you will not go into limp mode. but if the problem is still evident, you will have to have it repaired before it will work properly.
SOURCE: 2002 dodge neon code p0750
im not a trans. expert but would verify the range sensor (gear indicating sensor) is working properly and the L/R solenoid is ok. those are the 2 suspects for your problem
SOURCE: limp mode?
It may have a "loss of prime" code that usually follows a service of the fluid and filter. After you're sure the fluid is full at operating temperature, disconnect the battery for a few minutes and reconnect to see if the code resets. I hope this helps.
SOURCE: limp in mode
you have to change the solenoid control if your car is 3.5 engine the solenoid control located at inside the transmission..
SOURCE: 2001 dodge grand caravan stalls
Glad too hear your making progress, sounds like your dealing with a reasonable shop too. For future reference, take notes when your vehicle acts up. The more information you cn give your technician the easier it is to be fixed. Good luck, let me know how you make out.
R
SOURCE: LIMP MODE
You will have to have the fault codes read and removed. If it is permanently in limp mode it may suggest another problem.
6,334 views
Usually answered in minutes!
×