Question about Cars & Trucks
Posted by Anonymous on
If you go to autozone.com and sign up with them, there is a link to trouble shooting and then go to electrical in main body, once page has loaded at the bottom of the left list is a link for schematics. they are identical as the schemaics from chilton but is some what helpful, except no connectos or circut numbers which makes it hard to track ur problem down.
I’m happy to assist further over the phone at https://www.6ya.com/expert/christpher_f760d0f18f8eedc3
Posted on Sep 19, 2012
SOURCE: changing wiper motor in chev s10
It's not bad. They make a special tool to remove the motor from the arm assembly, but with a little determination I was able to remove it with out the tool. If your wipers aren't working try running power to the motor first to test it. I swapped it out and the problem ended up being a bad ground in the switch. I bypassed that for a little while by running a jumper wire from the engine block to motor. It also could be the pulse module they are known for going bad in GM vehicles.
Posted on Jan 21, 2009
your power starts at the brake light fuse,check with a test light,then proceed to stop light switch on brake pedal under dash,one wire will be hot when when you check it with your test light, the other won't be until you press down the brake pedal then the power flows through to the second wire,if no power to second wire replace switch,if you have power remove tail light bulbs and check for power in side socket.
Posted on Nov 26, 2009
Tips for a great answer:
Jun 21, 2017 | Cars & Trucks
Nov 09, 2015 | Cars & Trucks
Oct 12, 2015 | 1988 Chevrolet S-10
Feb 18, 2015 | Chevrolet S 10 Cars & Trucks
Feb 03, 2015 | Cars & Trucks
Dec 04, 2012 | 1986 Chevrolet Chevy
Apr 12, 2011 | 1995 Chevrolet S-10 CA Edition
Feb 04, 2011 | Chevrolet S 10 Cars & Trucks
Sep 01, 2009 | 1985 Chevrolet S-10 Blazer
1,721 people viewed this question
Usually answered in minutes!