Cars & Trucks Logo

Related Topics:

Question about Chrysler Cirrus

1 Answer

My 2000 Chrysler Cirrus is leaking water, thewater is running down the left side of the engine (passenger side of the engine). I can't feel water leaking at either water hoses.My cirrus is leakin

Posted by Terry Bolinger on

Add Your Answer
  • 1 more comment 
  • Terry Bolinger Jan 25, 2012

    Could my engine have a crack in it?

  • Anonymous Jan 25, 2012

    is the ac on when it happenes

  • Terry Bolinger Jan 25, 2012

    When I crank the car, I have my AC turned off.

×

1 Answer

Bill Boyd

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points
    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.
    Superstar:

    An expert that got 20 achievements.
    All-Star:

    An expert that got 10 achievements.

  • Chrysler Master
  • 53,816 Answers

Indicates a rusted out welsh plug
take it in for a cooling system pressure test

Posted on Nov 26, 2017

5 Related Answers

Anonymous

  • 1 Answer

SOURCE: how do I change the

I did a Google search "How do you replace the rear spark plugs on a 2000 Chrysler Cirrus?" and found this link: http://www.faqs.org/qa/qa-6243.html

I haven't tried it yet and am thinking of purchasing a Chilton manual just in case, but as far as explanations go the one at the very bottom of the page in the link sounds the most legitimate so far.

Besides, I have to pay you guys $9.99 for one answer that I can get for free; or I can get the Chilton and have a whole heap of answers for around $20.

Posted on Jul 14, 2008

Anonymous

  • 64 Answers

SOURCE: 96 chrysler cirrus 2.4 pouring out oil

going to be hard to see but the sensor for oil pressure is located in the rear somewhere close to the oil filter area. find that sensor bad alot. try that

Posted on Apr 06, 2009

Sgt Fluffy

Sgt Fluffy

  • 157 Answers

SOURCE: where is the spark plugs located on a 2000 chrysler cirrus.

Follow the ignition wires down.

Posted on Jun 10, 2009

Anonymous

  • 832 Answers

SOURCE: my 98 chrysler cirrus is lesking water and im told

First open the hood of your car and check where the leak is coming. Thermostat gasket is one source but
it could also come the radiator, radiator hose, or the
water pump. Check all these items, and you can do
the repairs by replacing the defective parts. Except for
water pump that really needs a mechanic to replace the
bearings and the mechanical shaft seal.

Posted on Oct 09, 2009

brgibson

  • 9 Answers

SOURCE: ignition switch thumbler in a chrysler cirrus

I had a mobile vehicle locksmith come by, take the ignition cylinder out in under 5 minutes, replace the wafers (tumblers) and then replace the cylinder in a few minutes. If you use a key cut to original specifications (which a locksmith could easily figure out from the old key and recut), rather than a copy of a copy with rounded instead of jagged edges on the key, it may just work for you. That is what the locksmith told me. It was so worn though that he just replaced the wafers (tumblers).

Posted on Mar 06, 2010

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
3answers

I have an 1999 chrysler 300m an it has an overheating problem. There is also water all over the driver side floor (front n back) it is soaked. It takes about 25mins b4 it starts smoking. Can som1 plz help...
Typically if your leaking coolant inside the car, it indicates your heater core is split and leaking. Replacing the heater core is quite the job. It requires removal of the dash board and heater box. i replaced one in a 97 Cirrus at work last week and it was a 6 hour job. If your not mechanically inclined i would definitley recomend phoneing around for quotes to local auto repair shops and getting it done profesionally.
Read full answer
Mar 15, 2011 • 1999 Chrysler 300M
0helpful
1answer

I have a 99 Chrysler Cirrus with a V6 2.5L. I have steam comming out from under the hood on the passenger side front of the car. Any suggestions?
Hello sounds like you have overheated your engine or cooling system hose or radiator is leaking let your engine completely cool down open radiator cap and refill you engine coolant close it up and restart and watch for your leaking point this could be a rad cap.radiator hose or the radiator tank and at this point you can access the problem and feel if you can attempt to repair or not.Or you can let the car completely cool down top up cool;ant in radiator and take the car into a garage.
Read full answer
Dec 27, 2010 • 1999 Chrysler Cirrus
2helpful
1answer

Cannot find the coil pack on at Chrysler Cirrus 2000, trying to replace it and cannot find it on the engine
There is only one reason you would not find a coil pack on your cirrus is if it is a v6, which is built into the distributor. (VERY common problem is the distributor on those cars, well that and crankshaft sensors) Because on the 4cylinder it is on the top of the engine. The distributor is just to the left (towards passenger side) of the brake master cylinder/booster. Not a fun job but can be done without removing a lot. Hope this helps.
Read full answer
Sep 25, 2010 • 2000 Chrysler Cirrus
4helpful
1answer

How to replace water pump on 2000 Chrysler Cirrus
In short, to replace the water pump you need to disassemble a good deal of the passenger side of the engine. Without a lift, this is not a easy job at home. If you really want to do it yourself, I highly recommend you get a Haynes manual for the car. It's invaluable for a large job like this. Just be prepared for a long job. The shop manual for this calls for 5.5 hrs. That's a mechanic with experience, a lift, and all the right tools. One huge suggestion for you though. Replace the timing belt while you are in there. Its a cheap part, and honestly it'll fail someday. This will save you another headache's worth of labor for one little part.
Read full answer
Sep 03, 2010 • 2000 Chrysler Cirrus
3helpful
1answer

How can i stop coolant leakage from my chrysler cirrus 2000
Depends where it is leaking. If it is leaking on top of the transmission bell housing it is probably the o ring on the back of the thermostat housing. (there is a rather large tube that carries coolant from the water pump on the other side of the engine to the t stat housing.) If the leak is passenger side it could be the water pump or the o ring on the other side of the earlier mentioned tube ( the tube runs under the intake manifold in the V of the engine). Other areas it could be the heater hoses or the upper or lower radiator hoses. Also a bad head gasket will do it also, signs of that can be water in your oil ( oil that is tan in color is a sign of moisture ) but you still can have a blown head gasket without water in the oil. A leaking heater core can also be a problem (wet area on the passenger side floor can be a sign of this) Also a worn radiator cap can leak into the overflow bottle and out on the ground. A sign of this is a over flow bottle that is completely full inspect the rubber seal an the cap or just replace it. The t stat housing problem is unique to the 2.5 v6 and the housing is tricky to remove. I described this procedure on wiki answer. Google - Thermostat housing 2.5 v6 water pipe 1996 and you will find it the instructions apply actually to a 1999 but is similar for most chrysler 2.5 v6's
Read full answer
Jul 25, 2010 • 2000 Chrysler Cirrus
0helpful
1answer

My car is trying to heat up and leak some water is it comeing from the water pump or heater co..how can i find the problem
If it is the water pump the water will be coming from the front of the engine. If it is the heater core it will be coming from the firewall area and you may even have water (coolant) leaking into the passenger compartment on the passenger side floorboard.
Read full answer
Apr 28, 2010 • 1999 Chrysler Cirrus
3helpful
2answers

My 1999 chrysler cirrus 2.5L LXI has overheated and coolant is boiling in a vapor form out of the bottom left side of the engine!! it was too much steam for me to see where it was coming from besides the...
A blown head gasket
Read full answer
Oct 17, 2009 • 1999 Chrysler Cirrus
3helpful
2answers

Where is coolant drain plug on 1996 Chrysler Cirrus?
The coolant drain plug is located on the bottom left side of the radiator when looking from front of car. To access it you must remove the passenger side fog light and push the rubber cover out of the way.
Read full answer
Jun 23, 2009 • 1996 Chrysler Cirrus
0helpful
1answer

Leaking radiator fluid
could be water pump or hole in hose.
Read full answer
Feb 17, 2009 • 1998 Chrysler Cirrus
0helpful
1answer

2000 Chrysler Cirrus engine jerking while in reverse, drive and also while sitting in driveway. Seems like while in drive/reverse car wants to shut down. Check Engine light on, was flashing for a minute...
the valve cover gaskets were leaking oil around the spark plug boots making the boot swell and causing a voltage leak. the engine misfired and stop lights. i did a tune up with new cover gaskets,plugs, wires, cap and rotor and she runs like a top. vrooom, vrooom!!
Read full answer
Dec 12, 2008 • 1996 Chrysler Cirrus
Not finding what you are looking for?

View Most Popular

Cars & Trucks

Related Question

I have an 1999 chrysler 300m an it has an overheating problem. There is also water all over the driver side floor (front n back) it is soaked. It takes about 25mins b4 it starts smoking. Can som1 plz help...

  • 1999 Chrysler 300M

Open Questions:

0answers

1996 chrysler concorde was leaking coolant, I replaced the top radiator hose. However the car is still leaking, and is now over heating when driving After replacing the hose and I took it for a drive, and it smoked a little afterward and the hose had no pressure, I can't find the issue. Could it be that the thermostat is stuck closed? I'm doing the repairs myself as I can't afford to go to a shop at the moment. The leaking is coming from the passenger side around the tire, I thought it was the top rad hose and it was replaced but it didn't fix the leak and now I'm a bit lost on where to go.
Read full answer
Be the first to answer Feb 02, 2023 • Chrysler Cars & Trucks
0answers

is there a fuel pump access door for a 2004 chrysler pacifica
Read full answer
Be the first to answer Dec 30, 2022 • Chrysler Cars & Trucks
0answers

the low beams on my 2000 chrysler concorde lxi dont work the high beams and parking lights do work I have checked the fuses they are fine
Read full answer
Be the first to answer Sep 20, 2021 • Chrysler Cars & Trucks
0answers

2012 Chrysler 300 - where is the Heater Core Temperature Sensor exactly located?
Read full answer
Be the first to answer Sep 11, 2019 • Chrysler Cars & Trucks

349 views

Ask a Question

Usually answered in minutes!

Popular Questions

Serpentine belt replacement.

1995 Chrysler Cirrus

My car's horn actives every time I turn the

2000 Chrysler Cirrus

How to change spark plugs an wires on a v6

1997 Chrysler Cirrus

Car shaking and sputtering. just changed o2 sensor

1999 Chrysler Cirrus

1999 chrysler cirrus transmission will not shift

Chrysler Cirrus Cars & Trucks

Check Out the Latest Top Trucks Report!
Check Out the Latest Top Trucks Report!

View all Fixya Reports

Top Chrysler Experts

Marvin
Marvin

Level 3 Expert

85241 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22509 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15083 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

PDF Manual
Haynes_Cirrus_Stratus_Breeze...

1995 Chrysler Cirrus

Loading...